カタログの抜粋
Convenience package removed; Control mounted on top for shipping Shipping Dimensions Control 86in (2184mm) Spindle Head as Shipped Shipping height (94"/2388mm) and width (7871981mm) shown Contact your local Haas Factory Outlet for further breakdown information
カタログの1ページ目を開く
VF-1 Revision C Page 2 of 5 March 2016 VF-1 Note: Foundation must extend at least 12in (305mm) from bored holes 12in (305 mm)
カタログの2ページ目を開く
Machine Layout Drawing VF-1 Interior Travels VF-1 Revision C Page 3 of 5 March 2016 X/Y Axis Clearances 1. The table shown is at XY home, the dashed line is the table at max XY travels 2. Measurements are from the edge of the table to the nearest obstruction 3. Dimensions shown are at the top of the table, dimensions are reduced as the height increases (5 degree slope inside the sheet-metal) 4. Dimensions are symmetrical unless otherwise stated Notes: 1. P-Cool dimension varies based on P-Cool position 2. Refer to the page on tool changer dimensions for tool changer heights
カタログの3ページ目を開く
14.50in (368mm) Usable Table Size
カタログの4ページ目を開く
Tool Changer Arm Moves Down 4.5" (114mm) During Tool Change The Umbrella Tool Changer moves in towards the spindle to do a tool change.
カタログの5ページ目を開くHAAS AUTOMATIONのすべてのカタログと技術パンフレット
-
ROTARIES & INDEXERS4 ページ
-
SuperSpeed-VF4 ページ
-
WIPS62 ページ
-
Lathe Operator’s Manual456 ページ
-
Haas Bar Feeder62 ページ
-
Compact Mill34 ページ
-
Chucker Lathe62 ページ
-
HA5C1 ページ
-
HA2TS Machine1 ページ
-
VF-7/401 ページ
-
DM-24 ページ
-
DM-13 ページ
-
VF-1YT5 ページ
