LandMark™005 INS/GPS
1 / 3ページ

LandMark™ 005 INS/GPSLow Noise MEMS GPS-Aided INS Automated Testing Comprehensive ERP Environmental Test Lab: - Shock - Vibration - Temperature Calibration - G-Sensivity -Axis Alignment - Centrifuge - GPS Simulation Products: Gyros Accelerometers IMU VG AHRS VG/GPS GPS/AHRS INS/GPS Low Cost Non-ITAR Commercial MEMS GPS-Aided AHRS 72 channel GPS 18 Hz Position Update Rate GPS Accuracy ± 2.0m CEP with SBAS Supports SBAS: WAAS, EGNOS & MSAS GPS Altitude ± 3 meter typical GPS-Aided Velocity & Built-in Turning Error Correction Heading Angle ± 0.5° Pitch & Roll Angles ± 0.25° Fully Compensated Bias & Scale Factor Over Temperature -40°C to +85°C Low Noise Gyros 0.0028° /sec/VHz Low Noise Accels 0.071mg/VHz In-Run Gyro Bias 5° /hour 1a Single RS485 Data Rate 100Hz Low Power < 825 mW typical Low Voltage +5 V (single sided power) Light Weight < 80 grams Small Size < 35cm3/2.13 in3 Rugged Environmentally Sealed Package Applications Flight Navigation Flight Control Ship Navigation Automotive Testing Laboratory Use Gladiator Technologies Division LKD Aerospace 8020 Bracken Place SE

Axes (Top View) Right Hand Rule Yaw Specification Mating Connector: M83513/03-BN Pin No. Specification subject to change without notice

3. Total transport time per message packet is: Full: (54 bytes * 11 bits/byte) / 115200 bps = 5.2ms