HeliSAS
1 / 4ページ

{{requestButtons}}

カタログの抜粋

HeliSAS - 1

HeiiSAS® | Autopilot & Stability Augmentation REDUCE PILOT WORKLOAD SAFER, MORE CONFIDENT COMMAND AUTO-RECOVER TO NEUTRAL ATTITUDE LESS THAN 15 POUNDS Autopilot and Stability Augmentation System for light and medium helicopters

カタログの1ページ目を開く
HeliSAS - 2

HeliSAS Autopilot and Stability Augmentation System Lightweight, easy to install, affordable, expandable The HeliSAS Autopilot and Stability Augmentation System from Genesys Aerosystems brings the tremendous safety and workload reduction advantages of stability augmentation— once reserved for military and transport category helicopters— to a wide range of light and medium helicopter models. Weighing less than 15 pounds, the HeliSAS sets a new standard for helicopter safety and productivity. It dramatically reduces pilot workload while providing precise control during all modes of flight,...

カタログの2ページ目を開く
HeliSAS - 3

All three configurations provide important workload reduction and safety enhancements: GPS/VOR/ LOC/GS Autopilot Control Panel Flight Control Computer Roll Servo Significant stability improvement. Pilots with no helicopter experience have successfully hovered a HeliSAS-equipped helicopter with very little practice. Automatic recovery to near-level flight. If the helicopter is inadvertently flown to an extreme attitude, releasing the cyclic when the HeliSAS is engaged will automatically return the helicopter to a neutral attitude. Further, the HeliSAS Autopilot system provides many of the...

カタログの3ページ目を開く
HeliSAS - 4

Copyright © 2014 Genesys Aerosystems. All rights reserved. *Some functions depend on the avionics installation. Genesys Aerosystems HeliSAS® Autopilot and Stability Augmentation System System Overview • ystem consists of only S seven primary components: 1. igital Flight Control D Computer 2. eliSAS Control Panel H 1. igital Flight D Control Computer • unctions as SAS computer F • rovides attitude hold P function 2. HeliSAS Control Panel • nstalled with full autopilot, I provides the functions of: - DG: Heading Select H and hold 6. yclic Control Buttons C (purchased separately) - NAV: 1. OR...

カタログの4ページ目を開く

Genesys Aerosystemsのすべてのカタログと技術パンフレット

  1. HeliSAS for R44

    2 ページ

  2. ADAHRS

    2 ページ

  3. GPS-WAAS Receiver

    2 ページ

  4. Remote Bugs Panel

    2 ページ

  5. SA-200

    2 ページ

  6. ST-360

    2 ページ

  7. GPS Steering

    2 ページ

  8. Yaw Damper

    2 ページ

  9. System 40/50

    2 ページ

  10. IntelliFlight 2100

    2 ページ

  11. S-TEC 5000

    4 ページ