Charon Turnstiles
1 / 12ページ

Charon Turnstiles For stylish access Transparent Perfectly coordinated Timeless

Stylish access control «The opening of our new head office was a great success. The entrance hall is spacious, transparent and open. Rather than clashing, the access control units blend in perfectly with the interior design.» Charon Turnstiles

Transparent Charon turnstiles In prestigious entrance areas, VIP rooms or at access points to the executive suite, the motor-driven Charon turnstiles efficiently control access and aesthetically complement any interior. Design The transparent glass and complementary high-quality stainless steel give these motor-driven turnstiles their radiant look. The transparent models elegantly blend in with the interior of old and modern buildings alike. Versatility The space-saving turnstiles look attractive even as multi-passage installations. Glass turnstiles are exclusively designed for the...

Advantages of Charon turnstiles The user and operator requirements as well as the architectural environment are crucial for decision making. Quiet, low-noise operation Low power consumption Elegant, transparent design Space-saving even as multiple installation Comfortable passage thanks to servo positioning drive Barrier-free solutions with automatic swing doors in matching design Swing doors suitable for installation in emergency and escape routes Versatile design of glass wings, guiding elements and bar handles Direction of passage/denial of passage in case of power failure can be defined...

The ideal solution for any access point Multiple installation in foyer – within eyeshot of reception staff Space-saving solution with integrated swing door for goods access Perfectly coordinated: warm wood, glass and stainless steel Safety solution in front of a lift Charon Turnstiles

Standard units Construction Material Side barrier elements Rotating unit AISI 304 stainless steel. Made of AISI 304 stainless steel tubing Ø 48 mm, mitred. With tubular column Ø 140 mm made of AISI 304 stainless steel. With three U-shaped barrier elements made of AISI 304 stainless steel tubing Ø 40 mm. Locking system, drive and toothed holding brake installed in tubular column. Stainless steel satin finish. Type 2 power-assisted motion; servo positioning drive/ electrically controlled in 2 directions. Passage side can be selected - inwards right or inwards left. Electrical equipment Power...

AISI304 stainless steel / toughened safety glass, 10 mm. Made of AISI 304 stainless steel tubing 0 48 mm, mitred. With tubular column 0 140 mm made of AISI 304 stainless steel. With three tall glass elements and stainless steel bar handles. x . c. Locking system, drive and toothed holding brake installed in ^ee • 6^ \C ^ *% °^ Stainless steel satin finish. <s05 -.^S^ -cSV1 A# - -cS>*^ - -tfV>^ - Type 2 power-assisted motion; servo positioning drive/electrically v- ^ ^e^* Passage side can be selected - inwards right or inwards left. Control unit in external switch cabinet In case of power...

Standard units Construction Material AISI 304 stainless steel / toughened safety glass, 10 mm. Side barrier elements Rotating unit Made of AISI 304 tubular stainless steel, Ø 48 mm, mitred, with 8 mm tempered safety glass. 180° rotating unit; tubular column made of AISI 304 stainless steel, Ø 140 mm. With two tall glass elements and stainless steel bar handles. Locking system, drive and toothed holding brake installed in tubular column. Tubular column made of Ø 140 mm stainless steel with 10 mm TSG glass element and bar handle. Stainless steel satin finish. Type 2 power-assisted motion;...

Construction Barrier elements with glass panel. Three bevelled barrier elements. Three half-height barrier elements. Options (depending on unit type) Electrical equipment Installation preparation with adapter or mounting plate. Installation With adjustable mounting plates X = 80 – 180 mm for sub floor level. With cast-in clamping elements. Consoles with adapter made of plastic or aluminium (also available in stainless steel for an additional charge). Push button in stainless steel tube console for manual single release. Operating panels and frames or surface mount housing. Additional...

Installation diagrams HTS-E03 example with "three bevelled barrier elements" option Charon Turnstiles Reader mounting

Charon Turnstiles

© Kaba Gallenschütz GmbH, www.kaba.com/PAS, subject to modifications  ·  31685EN 07