
カタログの抜粋

DataMan® 370 Series Quick Reference Guide
カタログの1ページ目を開く
Precautions To reduce the risk of injury or equipment damage, observe the following precautions when you install the Cognex product: l The reader is intended to be supplied by a UL or NRTL listed power supply with a 24VDC output rated for at least 2A continuous and a maximum short circuit current rating of less than 8A and a maximum power rating of less than 100VA and marked Class 2 or Limited Power Source (LPS). Any other voltage creates a risk of fire or shock and can damage the components. Applicable national and local wiring standards and rules must be followed. Route cables and wires...
カタログの2ページ目を開く
Ensure that the cable bend radius begins at least six inches from the connector. Cable shielding can be degraded or cables can be damaged or wear out faster if a service loop or bend radius is tighter than 10X the cable diameter. This device should be used in accordance with the instructions in this manual. All specifications are for reference purposes only and can change without notice.
カタログの3ページ目を開く
Symbols The following symbols indicate safety precautions and supplemental information: WARNING: This symbol indicates a hazard that could cause death, serious personal injury or electrical shock. CAUTION: This symbol indicates a hazard that could result in property damage. Note: This symbol indicates additional information about a subject. Tip: This symbol indicates suggestions and shortcuts that might not otherwise be apparent. Product Overview
カタログの4ページ目を開く
Item Lens Indicator light ring Trigger button Train status Read/no-read indicator
カタログの5ページ目を開く
Peak meter Tuning button External light control
カタログの6ページ目を開く
DataMan 370 Series Accessories LENS OPTIONS AND COVERS DM374 Accessory 8 mm F5.6 fixed aperture lens 12 mm F8 fixed aperture lens 16 mm F8 fixed aperture lens 25 mm F8 fixed aperture lens 35 mm F8 fixed aperture lens 40 mm F8 fixed aperture lens 50 mm F8 fixed aperture lens Liquid lens module and pre-focused 10.3* mm or 10.3 mm IR** M12 lens with wrench 24 mm F6 liquid lens module* 24 mm F6 liquid lens module*** 24 mm F10 liquid lens module*
カタログの7ページ目を開く
8 mm F8 autofocus lens* (use with HPIL wide) 10 mm F5 autofocus lens* (use with HPIT) 16 mm F8 autofocus lens* (use with HPIT) 24 mm F6 autofocus lens* (use with HPIT) 35 mm F8 autofocus lens* (use with HPIT) * With built-in IR blocking filter ** Without built-in IR blocking filter *** Without built-in IR blocking filter, and with built-in daylight filter LENS COVERS AND INTEGRATED ILLUMINATIONS Accessory C-Mount cover for C-Mount lenses
カタログの8ページ目を開く
Accessory Short C-Mount cover for C-Mount lenses DM500 C-Mount cover (use with HPIA) DM500 Lens cover extender
カタログの9ページ目を開く
DM360(Risk Group Red LED Exempt acc. IEC 62471, Risk Group HPIL-RE Green LED Aimer Exempt acc. IEC 62471) Polarized red LED HPIL, ESD safe, 10.3 mm lens DM360(Risk Group Red LED Exempt acc. IEC 62471, Risk Group HPIL-RE-P Green LED Aimer Exempt acc. IEC 62471) White LED HPIL, 10.3 mm lens (Risk Group White LED low risk acc. IEC 62471, Risk Group Green LED Aimer Exempt acc. IEC 62471) Red LED HPIL, 24 mm liquid lens (Risk Group Red LED Exempt acc. IEC 62471, Risk Group Green LED Aimer Exempt acc. IEC 62471) Polarized red LED HPIL, ESD safe, 24 mm liquid lens (Risk Group White LED low risk...
カタログの10ページ目を開く
Accessory Back light Coaxial (DOAL) light Spot light Dark-field light Brick light, narrow blue Brick light, narrow red Brick light, narrow white
カタログの11ページ目を開く
Accessory Bar light, wide red Bar light, narrow red, linear polarizer Bar light, narrow infrared Bar light, narrow blue Bar light, wide red Bar light, narrow white Bar light, wide white Bar light, wide white, linear polarizer Bar light, blue Linear Polarizer Kit Case
カタログの12ページ目を開く
Accessory HPIA, Red narrow HPIA, Red wide HPIA, White narrow (Risk Group White LED low risk acc. IEC 62471) HPIA,White wide (Risk Group White LED low risk acc. IEC 62471) HPIA, Blue narrow (Risk Group White LED low risk acc. IEC 62471) HPIA, Blue wide (Risk Group White LED low risk acc. IEC 62471) HPIA, Infrared narrow (Risk Group White LED low risk acc. IEC 62471) HPIA, Infrared wide (Risk Group White LED low risk acc. IEC 62471) HPIT, Red, wide, 10 and 16 mm lens (Risk Group Red LED exempt risk acc. IEC 62471) HPIT, Red, standard, 24 mm lens (Risk Group Red LED exempt risk acc. IEC 62471)...
カタログの13ページ目を開く
Accessory Passive Dome front cover Adapter (includes PCB light port adapter) FIELD OF VIEW EXPANDERS DM374 Accessory Field of view expander with mount Field of view expander Field of view expander
カタログの14ページ目を開く
OTHER Accessory Connection cable 24 V, I/O, RS-232 (y straight/angled, xx specifies length) Connection cable 24 V, I/O, RS-232 Power and I/O breakout cable, M12-12, straight, xx specifies length: 5 m, 10 m, 15 m, angled, xx specifies length: 5 m, 10 m, 15 m Power cable for multiple bar lights (use in combination with IVSL-5PM12-5) X-Coded to A-Coded Ethernet cable adapter, 0.5 m X-Coded to RJ45 Ethernet Cable (xx specifies length: 2, 5, 15, 30 m) External light cable (xxx specifies length)Compatible with CLRR / CLRB / CLRO / CLRS / CLRD illumination External light control cable for DataMan,...
カタログの15ページ目を開く
I/O extension cable, 5 m straight Laser aimer (use with HPIA) Connection module (4 or 1 camera) (xx can be US, EU, UK or JP) Pivot Mounting Bracket (for factory automation) Pivot Mounting Bracket (for logistics)
カタログの16ページ目を開く
Accessory External heat sink Note: For use with Xpand and over 40° C environments only. WARNING: For DM300-AIMER-00 and HPIT equipped with laser: This device has been tested in accordance with IEC60825-1 3rd ed., 2014., and has been certified to be under the limits of a Class 2 Laser device.
カタログの17ページ目を開く
C-Mount Lens (1"-32tpi) Optical axis DataMan 370 with High Power Integrated Light (HPIL)
カタログの18ページ目を開く
DataMan 370 with High Power Illumination Accessory (HPIA)
カタログの19ページ目を開く
DataMan 370 with High Power Integrated Torch (HPIT)
カタログの20ページ目を開く
DataMan 370 Series with High Power Integrated Torch (HPIT) and Passive Diffuser
カタログの21ページ目を開く
Field of View and Reading Distances Note: Due to tolerances, ranges can vary by +/- 5 % from unit to unit. Distances in mm / 1D min code 8 mm HSLL Distances in mm / 2D min code 8 mm HSLL 140 210 280 560
カタログの22ページ目を開くCognexのすべてのカタログと技術パンフレット
-
MX-1502
28 ページ
-
MX-1000 Series
22 ページ
-
MX-1100
23 ページ
-
VisionPro
18 ページ
-
Cognex Designer
18 ページ
-
CVL
23 ページ
-
DataMan® 8050
23 ページ
-
DataMan® 70 Series
25 ページ
-
DataMan® 260 Series
34 ページ
-
DataMan® 150 Series
28 ページ
-
DataMan® 8700
23 ページ
-
DataMan® 470 Series
39 ページ