Aluminum Plate
1 / 6ページ

Your foremost provider of specialty products, services and solutions Quik Guide Aluminum Plate

Aluminum Plate Quik GuideTYPICAL PROPERTIES111 All Wrought Plate Meets AMS-QQ-A-250, AMS, ASTM Specifications. The information in this quik guide is correct to the best of our knowledge. A. M. Castle & Co. assumes no responsibility for errors or omissions. A. M. Castle & Co. publishes this quik guide for guidance to their customers and reserves the right to add or delete items without notice. (1) The typical properties are not guaranteed, as in most cases they are averages for various sizes, product forms, and manufacturing methods. The data is intended only as a basis for comparing alloys...

PLATE SPECIFICATIONS ALLOY The specifications indicated are for general reference purposes and don't always represent Castle Metals® buying specifications. Complete Plate Processing Just In Time Delivery On-Line Order Entry Stocking Programs Heat Lot Segregation Complete Traceability Mill Test Reports

Note: Capability to provide tighter tolerances may vary with supplier (4) When a dimension is specified other than as an equal bilateral tolerance, the value of the standard tolerance is that which applies to the mean of the maximum and minimum dimensions permissible under the tolerance for the dimension under consideration. (5) Refer to Aluminum Standards & Data, Table 7.7a, for non-heat treat alloys & 6061 plate. (6) Alloy 6061 is stocked in one half commercial gauge tolerance on the plus side of the specified thickness.

Plate Sawing • Through 20" Thickness • 146" Maximum Length Plate Shearing • Up to .750" Thick • 20' Maximum Length Precision Plate Sawing • Cutting Tolerance As Close As ± .005" • Finish —Approximate 32 RMS • Through 6" Thickness ± .005 Through 6" ± .030 Over 6" Through 8" • 12' Maximum Length • Closer Tolerances are available upon request Precision Cut-Off Saw • Cuts A Variety Of Shapes Including Rod, Bar And Plate • Thicknesses Up To 6" • Micro Finish —Approximate 32 RMS • Tolerance ± .005 Circle/Ring/Contour Shape Sawing • 1/4" Through 10 Thick • 3" Through 72" OD • 35" Max ID CONTOUR...