Burners & Tanks
1 / 4ページ

Burners, Tanks, & Instruments Cameron 11- 15- and 20-gallon tanks are standard with 3-turn valves. Quick-shut-off valves (shown below) are also available. All tanks have protective padded collars. Connect one tank directly to each burner, or combine several tanks through Cameron's solid precisionmachined fuel manifold. This gives you the best flexibility to determine passenger or fuel load - your choice Three sizes of purpose-designed tanks offer you flexibility in your fuel capacity. All Cameron tanks have a full collar design to protect fuel fittings, yet the layout of the controls makes them easy to operate. Plus you can read the gauges from a standing position in the basket. This gives you better information while flying, to make critical decisions based on fuel consumption. The padded collars not only look great but protect you and your passengers from unnecessary bumps and bruises when you encounter less-than-perfect landing conditions. Cameron tanks are exactingly designed and built from a special Duplex Stainless Steel allowing them to pass even the most stringent cyclical pressure tests. They offer the best strength-to-weight ratio on the market. There is no better tank available for ballooning. Cameron's standard instrument is the wellproven Flytec 3040. This instrument eliminates the thermistor wire from the envelope replacing it with a reliable radio-transmitted temperature signal. The receiving unit can be mounted wherever you choose: on the uprights, on a special bolster-mount, or even on your arm. Also available is the newer Flytec 6040. The 6040 has all the features of the 3040, plus a built-in GPS to give you realtime speed and direction, a record of wind speed and direction in each altitude layer, and an automatically recorded flight log. The optional CamVent™ vapor venting system is perfect for those pilots who store their balloon in a trailer. Using a built in quick-release, you can simply connect a clear hose to the "spittervalve" to divert propane vapor outside the trailer where it can diffuse, instead of dangerously building up inside. The Flytec 3040 is standard on all models Also available is the Flytec 6040 with a built in GPS A padded bolster-mount is available for either Flytec instrument for those who prefer the more traditional instrument location. The Choice of Experienced Pilots All Cameron tanks use hand-tightened hose end fittings - no tools needed. It's an easy connection to make, and a check valve prevents leaks on disconnect should you accidentally leave the hose full of fuel When making decisions about your next balloon, you should consider more than just the features listed here. Keep in mind the company behind the product. Cameron has unequaled service - knowledgeable people to answer your questions and a full range of parts ready for shipment the same day to where ever you need them. Reliability means reliable today, and reliable for years to come. Remember that real value means lower costs in the long run, not just paying less in the beginning. Why do we go the extra mile? Quite simply it’s because we’re balloonists. We love to fly, and we’re actively involved in ballooning – above and beyond building balloons. We build the kind of balloons we want to fly. Rugged, reliable, efficient, ergonomic, high performance and beautiful. We also listen to our clients and incorporate their ideas into the products we offer. So give your local Cameron Representative a call, or contact us at the Cameron factory to see what new and exciting innovations await you. Come join Cameron, the world's largest ballooning family. • Power, Performance, Reliability Why Not Make Your Next Balloon A Cameron? Cameron Balloons U.S P Box 3672 .O. Ann Arbor, MI 48106 Phone: 866.423.6178 or 734.426.5525 Fax: 866.423.6179 or 734.426.5026 hotline@cameronballoons.com www.cameronballoons.com Cameron Balloons US

Ultra™ Double. Two separate, fully redundant burners joined by our CrossFlow™ valve and the point-and-shoot UltraGrip™ handle. CrossFlow™ permits one-handed operation of both burners from either fuel system. Stratus™ Quad. Well proven, ergonomic, low condensation, ‘work-horse’ burner. Safire™ Triple. More power than a conventional quadburner. High power, simplicity, lower cost. Quite possibly the perfect ride-burner. Safire™ Triple Stratus™ Quad Ultra™ Double No other element of ballooning has seen more development in the last four decades than the fuel system. We are proud to have led the...

Ultra™ Double. Two separate, fully redundant burners joined by our CrossFlow™ valve and the point-and-shoot UltraGrip™ handle. CrossFlow™ permits one-handed operation of both burners from either fuel system. Stratus™ Quad. Well proven, ergonomic, low condensation, ‘work-horse’ burner. Safire™ Triple. More power than a conventional quadburner. High power, simplicity, lower cost. Quite possibly the perfect ride-burner. Safire™ Triple Stratus™ Quad Ultra™ Double No other element of ballooning has seen more development in the last four decades than the fuel system. We are proud to have led the...

Burners, Tanks, & Instruments Cameron 11- 15- and 20-gallon tanks are standard with 3-turn valves. Quick-shut-off valves (shown below) are also available. All tanks have protective padded collars. Connect one tank directly to each burner, or combine several tanks through Cameron's solid precisionmachined fuel manifold. This gives you the best flexibility to determine passenger or fuel load - your choice Three sizes of purpose-designed tanks offer you flexibility in your fuel capacity. All Cameron tanks have a full collar design to protect fuel fittings, yet the layout of the controls makes...