Illustrated parts catalogue – SC07 Speed Cruiser
1 / 132ページ

Company Address Cellular Mail Author Date: B.O.T. Aircraft Ltd. Aeulestrasse 1 9495 Triesen Liechtenstein +41 79 611 4809 i nfo@bot-ai rcraft.com Reiner Tauern 10. Januar 2013

General Information Some parts cannot be replaced by the aircraft owner or any AMT as their replacement requires special knowledge. Such part may be installed or replaced only B.O.T. Aircraft Ltd. or by its US representative Renegade Lightsport Ltd. Composite work on any structural part requires special knowledge and may not be done by the owner or an AMT. It has to be made by the producer B.O.T. Aircraft Ltd. or by its US representative Renegade Lightsport only. Standard parts like bolts, screws, washers, etc. will not be listed and are automatically delivered together with the order...

Fuselage Fuselage 1.1.1 Complete fuselage (unpainted, without windows) This part may be mounted or replaced only by the producer or our US representative Renegade Lightsport 1.21.2.1 1.1.2 Roof (fixed to the fuselage - without the removable part) This part may be mounted or replaced only by the producer or our US representative Renegade Lightsport Glazing Front wind shield SC07-01 -113 1.2.1.1 Front wind shield - Colourless

Door glazing 1.2.2.1 Left side (Pilot's side) - Colourless Side window 1.2.3.1 Left side (Pilot's side) - Colourless Roof window Roof window (2 Pieces)

Roof 1.3.1 Unpainted roof (removable part) 1.3.2 Painted roof (removable part) 1.4 1.4.1 Fuel system Fuel Tank 1.4.1.1 Complete 23 gallon fuel tank (without level sensors and filling system, but with fuel reserve sensor) The fuel tank is tested for leak tightness under pressure before delivery

Reserve Sensor Sensor to indicate a reserve of about 4 gallons This part may be mounted or replaced only by the producer or our US representative Renegade Lightsport Fuel level sensor Fuel level sensor (0% – 100%) – maximum 12V output Filling pipe Filling pipe including the connection nipples for the over pressure (ventilation) of the fuel tank.

Fuel Cap Complete Set fuel cap including bolts and keys Fuel Filter Fuel Filter with water draining valve carburettor Ventilation system Ventilation pipe (Standard fuel resistant plastic tube)

Auxiliary Fuel Pump

1.4.11 Main fuel valve For more detailed information about the fuel system please download the fuel system plan on producer's website: Fuel system plan (ROTAX Engine) (http://www.bot-aircraft.com/ download/Fuel System (Rotax).png) Elevator / Fuselage Cover 1.5.1 Left side cover (Co-Pilots side)

Cowling for ROTAX Version 1.6.1.1 Upper Cowling (Version ROTAX 912 ULS), painted in white 1.6.2 1.6.2.1 Upper Cowling (Version D-MOTOR LF26) , painted in white 1.6.3 Maintenance access cover 1.6.3.1 Maintenance access cover (Version ROTAX 912 ULS) , painted in white

Wing Right Wing These parts may be mounted or replaced only by the producer or our US representative Renegade Lightsport Complete right wing (Co-Pilot) 2.1.1.1 Complete wing including position and strobe light unit, all controls mounted and painted in white colour 2.1.2 Right position / strobe light group (Co-Pilot)

2.2 Left Wing These parts may be mounted or replaced only by the producer or our US representative Renegade Lightsport 2.2.1.1 Complete wing including position and strobe light unit, pipe for pitot tube installed, all controls mounted and painted in white colour 2.2.1 Right position / strobe light group (Co-Pilot) Strobe and position light 2.3 Wing fixing pins SC07-03-201 2.3.1.1 Main spar pin (2 pieces)

Horizontal stabilizer and Elevator (electrical trim version) Complete horizontal stabiliser with its elevator (movable part) Complete with electrical trim servos and mechanism Pushrod and electrical cable not included Horizontal stabilizer and Elevator (mechanical trim version) Complete horizontal stabiliser with its elevator (movable part) Complete with mechanical trim mechanism Pushrod and Bowden cable not included Elevator fixing set 3.3.1 Set of metallic parts required to fix the elevator system to the airframe

Elevator fixation plate Elevator fixation axis support Elevator fixation axis Centring nugget

Trim system Mechanical trim system 3.4.1.1 Mechanical trim system (Complete) Trim handle (Complete) Trim Bowden cable Cable attachment

Fixing angle Securing ring

Trim lever (Trim flap) Electric trim system 3.4.2.1 Electric trim system (Complete Set) Trim servo

Trim position indicator Trim switch (Up / Down)

Vertical rudder 4.1.1.1 Complete vertical rudder including all attachment points Without control cables Lower pin – including rudder control lever Rudder control lever

Lower rudder bearing support Lower rudder bearing support – Inside counter plate Upper rudder pivot This part may be mounted or replaced only by the producer or our US representative Renegade Lightsport Upper rudder support

Main landing gear Main landing gear left and right One piece main landing gear for left and right side. Painted in white. This part may be mounted or replaced only by the producer or our US representative Renegade Lightsport Fairing attachment unit Fairing attachment (Including distance holder) Right side fairing main landing gear (Co-Pilot’s side) Fairing main landing gear (Co-Pilot’s side)

Left side fairing main landing gear (Pilot’s side) Fairing main landing gear (Pilot’s side) Main wheel Complete main wheel – 6’’ from BERINGER Tyre and Rim completely assembled 4.00-6" 6 ply Wheel Axis Wheel Axis

Main wheel brake disc 5.5.3.1 Brake disc only – 6’’ wheel from BERINGER Brake disc securing (Standard securing wire) Calliper Standard BERINGER Calliper – 6’’ Wheels

Anti-skid in Line Regulator Remote brake fluid reservoir Brake force distributor

Nose gear Complete nose gear Complete nose gear without 5’’ wheel Complete nose gear wheel 6.2.1 Complete wheel for nose gear - 5’’ from BERINGER - 4.00-5" 8ply

Nose gear wheel rim Nose gear tyre Nose gear strut including fairing (lower part)_ Nose gear strut is included in the fairing structure - Modell 2013