カタログ >
AveoEngineering s.r.o. >
PosiStrobe MiniMax

PosiStrobe MiniMax
1 / 5ページ

カタログの抜粋

1. PRODUCT INFO Developed originally at the request of the world's leading UAV manufacturers, all of which now utilize Aveo lighting, the MiniMax is a compact powerhouse of hemispheric light. Available in red or white LEDs, it is an ideal anticollision light for very light aircraft or UAVs. It is also a great anticollision light to use on upper and lower fuselage in combination with AveoFlash wing lights due to its incredibly small footprint. MAIN FEATURES: - 2-in-1 Position & Strobe, popular miniature anticollision light for Trikes, PPC, UAVs, ultralights - extremely lightweight at only 53...

カタログの2ページ目を開く

4. TECHNICAL SPECIFICATION Dimensions: Weight: Operating Voltage Range: Power – position: Power – strobe: Current – position (@12V): Current – strobe (@12V): Repetition Flash Rate of Strobe: Recommended size of mounting screw: Reverse polarity protected Waterproof Vibration-proof Shock-proof Dust-proof Over Voltage protected see section 5 - Technical drawing 53 g / 1.87 oz 9 – 36 Vdc 2.6 W 24 W 0.22 A 2 A peak 50 cycles per minute M3, stainless steel recommended.Length depends upon placement location on wing tips. NO YES YES YES YES NO

カタログの3ページ目を開く

7. TESTING THE FUNCTION OF THE AVEO AURORA/GALACTICA SERIES LIGHTS BEFORE INSTALLATION All Aveo Aviation lights undergo rigorous testing prior to being released from our engineering manufacturing department. This testing involves a burn-in time as well as other function testing. No light is released for sale without undergoing this extensive operational testing. When you receive the Aveo Aurora Series Aviation Lights, and wish to test the function of the lights prior to installation on your aircraft, please note the following: 1. Please review the written information that is enclosed in the...

カタログの4ページ目を開く

3. Testing of the function of each light can be done with a regular 12V/5A dc power supply (not a battery chargers). Connect the black wire to the ground (negative) leads of a power supply, then connect the red wire to the positive (+) leads on the power supply. The position light should light up. While the red wire is still in contact with the positive side of the power supply, connect the yellow wire to the positive lead. Both the position and the strobe function should work. Strobe function is separate from the position function and can be tested separately. To test the strobe function...

カタログの5ページ目を開く