PrecisionLine Automatic  testing machines for low loads
1 / 2Pagine

{{requestButtons}}

Estratti del catalogo

PrecisionLine Automatic  testing machines for low loads - 1

Zwick Materials Testing Zw/ck / RoellProduct Information PrecisionLine Automatic - testing machines for low loads PI 743 2.1115 Range of application The new-generation spring-testing instruments are suitable for use in both production lines and design and development and are used for testing compression springs and components. Very small springs used in powerful miniaturized mechanical and electro-mechanical assemblies can also be tested using the PrecisionLine Automatic. With the testControl measurement and control system and testXpert® II test software, the PrecisionLine Automatic is the ideal precision testing system for these applications. Standard interfaces enable connection of additional measuring devices such as dial gages, callipers, micrometers and sensors. Advantages/Characteristics • Extremely high measurement precision due to: - Mechanical deformation compensation - Direct load application and travel measurement in the test axis - Extremely high frame stiffness - Synchronous recording of force and spring travel • Excellent reproducibility through complete elimination of operator influence • Integrated mechanical overload protection for load cell • User-oriented testXpert® II software with options including statistical evaluation, quality control chart, central inspection plan management, barcode reader connections and many others • testXpert® II’s archiving functions and open interfaces ensure optimum data traceability • PrecisionLine and its comprehensive selection of accessories and software products are developed and produced at Zwick Roell’s own production plant in Germany • All mechanical, electronic and software components are ideally matched, making PrecisionLine a product with the highest quality standards and allowing Zwick to offer the best possible service. • Inclusive protective screen Options • Interchangeable precision compression platens, diam. 36, 60, 100 mm (hardened steel or ground ceramic faces) • 200 N, 500 N or 2.5 kN load cells with deformation compensation • Compression die with diameter 2 mm and spherical surfa

Aprire il catalogo a pagina 1
PrecisionLine Automatic  testing machines for low loads - 2

Zwick Materials Testing Product Information PrecisionLine Automatic - testing machines for low loads Type Item number Load frame Stroke Testing area Weight (incl. compression platen, without electronics) Dimensions (width x height x depth) Ambient temperature Air humidity Conformity Measurement and control electronics Force measurement Stroke resolution Measurement range Real resolution in tensile/compression direction Test data group transmission rate to the PC Zero-point correction Measurement signal runtime correction for both channels Output interface Required PC connection (for PC...

Aprire il catalogo a pagina 2

Tutti i cataloghi e le schede tecniche ZWICK GMBH & CO. KG

  1. HC Series

    2 Pagine

  2. HB series

    3 Pagine

  3. Vibrophore 250

    3 Pagine

  4. Vibrophore 100

    3 Pagine

  5. Vibrophore 50

    3 Pagine

  6. Vibrophore 25

    3 Pagine

  7. LTM

    5 Pagine

  8. roboTest A

    2 Pagine

  9. roboTest B

    2 Pagine

  10. roboTest I

    2 Pagine

  11. roboTest P

    2 Pagine

  12. H-series

    2 Pagine

  13. Z330E

    3 Pagine

  14. Vicat Dry

    2 Pagine