V4700
1 / 2Pagine

{{requestButtons}}

Estratti del catalogo

V4700 - 1

Series 4700 valves are designed for use with most common non-corrosive fluids and gases. They are widely used in many current aircraft fuel systems. The series is particularly suitable for low pressure drop requirements and contaminated liquid systems. Series 4700 are direct acting, solenoid shut-off valves. They permit flow to be shut off in either direction and allow either of the two ports to be used as the pressure port. Series 4700 valves are extremely reliable because their simple construction contains only two moving parts. They are lightweight and compact. Valve shutoff is accomplished by use of Valcor’s “Floating Seal” Principle. This utilizes an optically flat seat disc against an equally flat seat. The gate-type action actually wipes the seat clean with each valve operation. The wiping action virtually keeps the valve from being affected by contaminants. • 2-way Shut-Off • Gate-Type Design • Floating Seal • 3/8” O.D. Line • Configurations: Normally Closed/Normally Open • Temperature: -65°F to + 165°F (Standard Static Seals)/-65°F to +450°F (Special Static Seals) • Pressure range: 0-1200 PSIG Maximum • Proof pressure: 1500 PSIG • Bursting pressure: 3000 PSIG • Weight: 0.44 lbs (approx.) © 2015 VALCOR ENGINEERING CORPORATION PH:973-467-8400 FX:973-467-9592 WWW.VALCOR.COM

Aprire il catalogo a pagina 1
V4700 - 2

SOLENOID VALVE SERIES 4700 Specifications Operating Pressure and Flow Ranges NORMALLY CLOSED CONFIGURATION Equiv. Sharp Edged Orifice CD =.65 Ambient Temp. Operating Pressure (PSIG) These ratings are based on using JP4 Aviation Fuel. Other orifice sizes, both larger and smaller, are available. However, ratings would change accordingly. For higher temperatures, the pressure rating must be reduced. The following table approximates the derating required. Temperature Derating Factor Electrical Data Voltage Duty 18 to 30 VDC 30 OHM Coil, Continuous or Intermittent 47 OHM Coil, Continuous...

Aprire il catalogo a pagina 2

Tutti i cataloghi e le schede tecniche VALCOR ENGINEERING CORPORATION

  1. V522-7010

    1 Pagine

  2. SV525

    2 Pagine

  3. SV515

    2 Pagine

  4. SV91

    2 Pagine

  5. SV97

    2 Pagine

  6. SV95

    2 Pagine

  7. V526G

    2 Pagine

  8. V526P

    2 Pagine

  9. V526D

    2 Pagine

  10. V526B

    2 Pagine

  11. V19800

    2 Pagine

  12. V5000

    2 Pagine

  13. SV61/62

    2 Pagine

  14. SV11/12

    2 Pagine

  15. V14500

    2 Pagine

  16. V3400

    2 Pagine

  17. V70900

    2 Pagine