TTX - High flow STANAG 3756
1 / 12Pagine

TTX couplings High flow transfer | STANAG 3756

Optimum flow, minimal pressure drop

Speed, ease of handling and safety Designed to meet stringent requirements, increase your energy efficiency. Strong handles made of forged adapters as the valve shaft does never protrude from the fitting. Integrated swivel avoid torsion of the hose line even under pressure. Non-spill technology Limited introduction of air into circuits better stability against lateral forces. Reduced possibility of workplace Low force coupling operation. Operators are protected against Shock protection ring rail tank wagon, tank trucks, ergonomics under pressure and a Double bearing swivel for a better...

Available options Safety locking system Proximity sensor Mechanical coding This safety lever, actionable with one The sensor monitors that hose unit is hand, makes disconnection impossible circuit inversion thereby safeguarding the When integrated into the customer’s It therefore prevents any untimely inter- ruption during fluid transfers and reduces additional level of safety, for example by accident risks. authorizing or not authorizing pump start- Color coding Coloured handles Powder coating on tank unit. For easy circuit location, different colours are available for your hose unit...

Hose nominal diameter Equivalent flow diameter (mm) Maximum allowable pressure PS (bar): - for aluminum version - for stainless steel version Minimum and maximum allowable temperature TS (°C) depending on material series and seal type: Stainless steel version Aluminum version - with Nitrile (NBR) seal - with Ethylene-Propylene (EPDM) seal - with Fuorocarbon (FKM) seal - with Perfluoroelastomer (FFKM) seal Ethylene-Propylene (EPDM) Other fittings available on request. Perfluoroelastomer (FFKM) Predominantly austenitic stainless steel or aluminum. Forged aluminum handles. Protective dust...

How to create your hose unit (plug) part number TTX XX-DNXX.XXXX Mandatory elements To create your hose unit part number, add the following elements and options to the standard part number: Standard part number Colour code Material series (predominantly) (Color on the handle - For TTX20-DN25: colour possible only if choice of handle option /VT - See point 4 ) Mechanical coding TTX60-DN80. TTX20-DN25 : only this diameter can be delivered without Other key-locks on request: consult us. handles: in this case do not put any code. TTX65-DN100 : narrow handle option (VTE) also available (see...

How to create your tank unit (socket) part number TTX XX-DNXX.XXXX Mandatory elements To create your tank unit part number, add the following elements and options to the standard part number: Mechanical coding Material series (predominantly) Other construction available on request depending on the Colour code

Part numbers Hose unit (plug) Designation Female thread Part numbers * ot available for aluminum version n

Hose unit caps Designation Part numbers

Part numbers Tank unit (socket) Designation * not available for aluminum version Part numbers Female thread

Tank unit caps Designation Part numbers Quick maintenance tools. Spare parts (handles, sealing kits, locking kits…). Other tools. Don’t hesitate to contact us.

Stäubli Units Stäubli Units Representatives /Agents Representatives / Agents Global presence of the Stäubli Group www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 15/04/2020. We reserve the right to modify product specifications without prior notice. corporate.communications@staubli.com | Photocredits: Stäu