FLOWSIC300 Ultrasonic Gas Flow Meter
1 / 177Pagine

OPERATING INSTRUCTIONS Ultrasonic Gas Flow Meter Ultrasonic Gas Flow Meter for Process Applications Sensor Intelligence.

Document Information Product Product name: Firmware: American National Standards Institute Document ID Title: Part No.: Version: Release: American Standard Code for Information Interchange American Wire Gage Condition Based Maintenance Canadian Standards Association Direct Current Manufacturer SICK Engineering GmbH Bergener Ring 27 · D-01458 Ottendorf-Okrilla · Germany Phone: +49 35 20552410 Fax: +49 35 20552450 E-mail: info.pa@sick.de Deutsches Institut für Normung (German Standards Institute) Euro Norm Original documents The English version 8014244 of this document is an original document...

Warning Symbols Information Symbols IMMEDIATE DANGER of serious injuries or death Important technical information for this product Hazard (general) Information on product condition with regard to explosion protection (general) Hazard in potentially explosive atmospheres Hazard through explosive substances/substance mixtures Supplementary information Hazards through electrical voltage Note referring to information at another location Hazards through toxic substances Warning Levels / Signal Words DANGER Risk or hazardous situation which will result in severe personal injury or death. WARNING...

About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 For your Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hazards during installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hazards during operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

MEPAFLOW600 CBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Software installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Overview of installation work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Project planning . . . . . . . . . . . . . . . . . . . . . . ....

Safety information for the fitting tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Work safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety of hydraulic equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Proper installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accident risk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Information on initial start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Connecting to a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Connecting to a serial interface (RS232/COM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Connecting to a USB port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Connecting to MEPAFLOW600 CBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Displaying status alarms and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Checking the device status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Checking user warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 Battery service life/capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Starting a diagnosis session. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Important Information Important Information Subject to change without notice About this document For your safety Intended use Restrictions of use Additional information Disposal information Responsibility of user FLOWSIC300 · Operating Instructions · 8014244/YZF6/V 1-1/2016-07 · © SICK Engineering GmbH

Important Information About this document These Operating Instructions contain essential information on the function, installation, start-up and maintenance of the FLOWSIC300. Hazards during installation CAUTION: General risks during installation ▸ Observe applicable valid regulations, general standards and guidelines. ▸ Observe local safety regulations, operating instructions and special regulations. ▸ Observe the information on responsibility of the user (→ p. 15, §1.6). WARNING: Hazards through the gas in the system The following conditions can increase the risk: ● Toxic gas or gas...

Important Information Hazards during operation WARNING: Hazards through leaks Operation in leaky condition is not allowed and possibly dangerous. ▸ Check leak tightness of equipment regularly (→ p. 141, §9.4). NOTICE: Risk of damage in pipeline ▸ Protect the ultrasonic sensors (→ p. 22, § Fig. 2) against liquids and mechanical effects. ▸ Pay particular attention here when the pipeline is to be cleaned with a pipeline inspection gauge. ▸ If the pipeline is to be purged with liquid: First observe the information in §9.1 (→ p. 140). Otherwise the ultrasonic sensors can be damaged or made...

Important Information Operation in potentially explosive atmospheres WARNING: Risk of explosions in potentially explosive atmospheres When the measuring system is to be used in a potentially explosive atmosphere: ▸ Only use the FLOWSIC300 measuring system in potentially explosive atmospheres that correspond to the individual device specifications. Otherwise there is a risk of explosions. The inside of the pipeline does not belong to the surrounding potentially explosive atmosphere. The pipeline does not have to have the same atmospheric conditions as the surrounding Ex zone. Subject to...