Encoders and Inclination Sensors
1 / 32Pagine

PRODUCT OVERVIEW ENCODERS AND INCLINATION SENSORS PATH-, ANGLE- AND SPEED MEASUREMENT IN PERFECTION Incremental encoders, Absolute encoders, Safety encoders, ­ Linear encoders, Wire draw encoders, Measuring wheel encoders, ­ Inclination sensors

Encoders and Inclination sensors  ENCODER AND INCLINATION SENSORS Paths, position, angle – an encoder is the ideal solution when it comes to precise position detection in industrial automation. The same applies to measuring revolutions and rpm as well as speed and acceleration. High-resolution optical encoders and extremely rugged magnetic encoders complement one another perfectly and permit exact measurements in all kinds of applications. Rotary encoders are available as incremental and absolute encoders. Wire draw encoders and linear encoders with a measuring element are available in...

  Encoders and Inclination sensors SAFETY ENCODER Incremental encoders for functional safety generate information about position, angle, and revolution counts. When combined with a safe evaluation unit, this enables users to meet the safety function requirements set out in IEC61800-5-2. Safety encoders can be used in a variety of applications in factory and logistics automation. Safety functions in stationary machines Stationary machines are often equipped with mechanical solutions, such as doors or flaps, to separate the user from hazardous points. When working on machines in maintenance...

Encoder and Inclination sensors  LINEAR ENCODER The field of application for cranes encompasses nearly all areas of logistics from indoor to outdoor. This means that fine dust in cement factories or seawater from ship-to-shore cranes can quickly become a problem. Resistance to dirt, shock, vibration, and salt water is therefore a basic requirement for crane positioning systems. The KH53 linear encoder was designed specifically for such ambient conditions. It is used to position the trolley on the crane and to position the path of the crane itself. Due to its excellent repeatability, the...

Selection Guide Incremental encoder Incremental encoder Which interface connection is required? TTL HTL TTL/HTL Universal Open Collector Sin/Cos What is the maximum amount of space available for installation (diameter)? Up to 37 mm Up to 40 mm Up to 50 mm Up to 60 mm Up to 90 mm Which type of flange or shaft is required? Face mount flange Servo flange Blind hollow shaft Through hollow shaft Measuring wheel system What hollow shaft diameter is required? Up to 8 mm Up to 10 mm Up to 12 mm Up to 15 mm Up to 5/8" > 5/8" What resolution is required? (pulses per revolution/steps per revolution)...

Absolute encoders How many revolutions are to be absolutely measured? Which interface connection is required? Analog 4 to 20 mA / Analog 0 to 10 V ■ ■ Parallel ■ What is the maximum amount of space available Which type of flange or shaft is required? Face mount flange ■■■■■■■■ Servo flange ■■■■■■■■■ Blind hollow shaft ■■■■■■■■ Through hollow shaft ■ ■ ■ What hollow shaft diameter is required? What resolution is required? (pulses per revolu- 11 Analog resolution dependent on programmed measuring range. 2) Encoders can in principle be programmed/configured, but can also...

selection guide Wire draw and linear encoder 11 Available upon request. 8019516 /2016-04-15 Subject to change without notice

• Connection with universal cable outlet • Designs with blind hollow shaft or face-mount flange with solid shaft • Face mount flange with 6 mounting hole patterns and servo groove • Hollow shaft with universal stator coupling • Compact housing diameter of 37 mm with-compact construction depth, • Electrical interfaces: TTL/RS-422, HTL/ Push Pull and Open Collector NPN • Number of lines: 10 to 2,500 • Temperature range: -20 °C... +85 °C • Enclosure rating: IP 65 • Connection with universal cable outlet • Face mount flange with 8 mm solid shaft • Face mount flange with 2 mounting hole patterns...

PRODUCT FAMILY overview Incremental encoder Rugged, versatile incremental encoder for industrial applications Rugged, high-performance incremental encoder Compact diameter Rugged, low-cost design Interfaces: Open collector NPN, TTL/RS-422 or HTL/Push Pull. Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector Face mount flange with solid shaft Housing for simple clamping ring mounting Any number of lines possible from 1 to 2,048 Face mount flange, servo flange, blind and through hollow shaft Housing unit: 0 58 mm; compact mounting depth,...

Incremental encoder with 3.5“ diameter Pulses per revolution: 120 ... 16,384 Selection of various electrical interfaces: TTL/RS-422, HTL/Push Pull and OpenCollector High enclosure rating:IP 66 Blind hollow shaft for shaft diameters up to 30 mm or 1-1/8“ Connection via cable outlet or 10-pin MIL male connector Compact installation depth High resolution up to 16 bits Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial Electrical interfaces: 5V & 24V TTL/RS-422, 24...

Product family overview Incremental encoder 8019516 /2016-04-15 Subject to change without notice

Flexible, smart, compact Flexible, smart, compact • Compact 36 mm absolute encoder with max. 26 bits (singleturn: 14 bits, multiturn: 12 bits) • Face mount flange, servo flange, blind hollow shaft • Rotatable M12 connector or rotatable cable outlet • SSI interface • Programmable SSI version: Resolution, preset value, etc. can be programmed (depending on the type) • Protection class up to IP 67 (depending on the type) • Operating temperature: -40 °C to +100 °C (depending on the type) • Compact 36 mm absolute encoder with max. 26 bits (singleturn: 14 bits, multiturn: 12 bits) • Face mount...