Estratti del catalogo
SELF-LOCK CONNECTORS Designed to Reduce Installation Time As a leader in civil aircraft interconnection and RF connectors, Radiall introduces a new innovative technology in response to market demands to eliminate locking wires. Radiall’s Self-Lock RF connectors are the perfect solution to provide secure connection-facing vibrations experienced in aerospace applications. For support contact: info@radiall.com With all the antennas present on civil aircraft, cable assemblies for airborne electronic systems are still receiving plenty of development attention. Coaxial cables remain the transmission medium of choice. It is not uncommon for a single aircraft to contain several hundred coaxial cable assemblies. Often the connection is difficult to reach and even more difficult to secure with tie wire. To expedite the installation of these assemblies into the aircraft, new self-locking connectors have been developed. Eliminating the need for safety wires saves many hours during both the initial build cycle and whenever equipment is removed or replaced for service. Despite the obvious advantage of eliminating tie wires, several constraints imposed by the aircraft manufacturers made this effort a challenge. The envelope dimensions and mass had to remain very similar to those of the original connectors. Although this increased the mechanical complexity for the new design, this requirement has been achieved. Additionally, the ability to resist harsh environments has been maintained. The assemblies provide reliable performance over the -55° to +125°C temperature range from below sea level to 70,000 feet of altitude even when subjected to vibration levels up to 25 gs. An internal engineering test and evaluation program has shown that these designs still meet the stringent MIL-T-81490 and MIL-C-87104 requirements with the self-lock mechanism, all with limited increase in size and mass.
Aprire il catalogo a pagina 1Radiall’s Self-Locking series is the sole existing one step connection solution that simplifies life. The Self-Locking design is intended to eliminate the need for lock-wiring the coupling nut in place with tie wire. The connector will still need to be tightened to the mating connector via the use of a torque wrench. The locking feature is achieved via a spring loaded, corrugated washer. Corrugated washer: anti rotation system similar to 38999 style connectors Self-Locking SMA and N connectors are also available upon request in addition to the TNC and SMA 2.9 connectors illustrated. As...
Aprire il catalogo a pagina 2Tutti i cataloghi e le schede tecniche RADIALL
-
ULTRA LÉGER
38 Pagine
-
LuxCis® ARINC 801
2 Pagine
-
LuxCis® ARINC 801 Contacts
14 Pagine
-
BNC 75
28 Pagine
-
EPX™ - EN 4644
70 Pagine
-
SHF3 UF
2 Pagine
-
ANTENNAS
4 Pagine
-
COAXIPACK 2
15 Pagine
-
SMA/SMA-COM/BMA
53 Pagine
-
BNC/BNC 75 HDTV/BNC-TRX
31 Pagine
-
ADAPTERS
37 Pagine
-
4.1-9.5/4.3-10/QLI/7-16
25 Pagine
-
NSX ARINC 600
6 Pagine
-
GPS Antenna Solutions
2 Pagine
-
Telecom
6 Pagine
-
MCX/MMCX/MMS/MMT/MML
25 Pagine
-
QUICKFUSIO™ SERIES
26 Pagine
-
SMB/SMB-LOCK/SMC
29 Pagine
-
MPX Series
45 Pagine
-
R163/R143/R127/R327
23 Pagine
-
N/TNC/C
37 Pagine
-
SSMA/SSMB/SSMC
15 Pagine
-
SHF Cable Assemblies
38 Pagine
-
Fiber Optic Products
226 Pagine
-
COAXIAL, RF & MICROWAVE
591 Pagine
-
MMBX/SMP-MAX
17 Pagine
-
SPACE
6 Pagine
-
SMPM / SMP / SMP-LOCK™/ SMP-COM
28 Pagine
-
Q-MTITANTM ARINC 846
2 Pagine
-
C-MTitan™
2 Pagine
-
EPX™ SERIES Product Catalog
70 Pagine
-
DSX Series SAE AS81659 Arinc 404
63 Pagine