Model CPC8000-H
1 / 7Pagine

Calibration technology WIKA data sheet CT 28.05 for further approvals see page 4 ■ Transmitter and pressure gauge manufacturers ■ Calibration and service companies ■ Industry (laboratory, workshop and production) ■ Research and development laboratories ■ National institutes and institutions Special features ■ Pressure ranges: 5 ... 700 bar up to 20 ... 1,600 bar (75 ... 10,000 psi up to 290 ... 23,000 psi) ■ Pressure medium: Hydraulic oil or water ■ Control stability: 0.005 % of FS ■ Accuracy: to 0.01 % of FS ■ Interchangeable reference pressure sensors Precision high-pressure controller, model CPC8000-H Application The model CPC8000-H precision hydraulic high-pressure controller is especially suited as a factory/working standard for the automatic testing or calibration of all types of high-pressure measuring instruments, due to its high accuracy and control stability. However, autofrettage applications or cyclic pressure-load tests are also ideal application areas, thanks to its robustness and reliability. For the supply to the controller, other than the voltage supply, only clean dry compressed air for the pneumatic control circuit is needed. As a pressure medium on the output side, hydraulic oil or water (or other media on request) can be used. Design The CPC8000-H consists of two components, the model CPC8000-HC pressure controller and the model CPC8000-HM hydraulic module with the reference pressure sensors. The hydraulic module is available in two versions, as low pressure version with a pressure range of 5 ... 700 bar (75 ... 10,000 psi) bar and high pressure version with a pressure range of 20 ... 1,600 bar (290 ... 23,000 psi) with each suitable reference pressure sensors. The complete system is available as a 19" plug-in case or built into a 19" rack. The sensors can be changed via the front of the hydraulic module, without having to dismantle the complete controller (e.g. out of a calibration rig). Functionality Through its specialist technology, the desired pressure value from the controller is regulated quickly and simply. Maximum ease-of-use is achieved through the large touchscreen and the simple and intuitive menu navigation. In addition, its easy operability is further supported by the availability of a large number of menu languages. On the large touchscreen, all necessary information such as current measured value and set point can be found on a single screen. Optionally, the measured values can be displayed in other pressure units additionally. The pressure controller can be remotely controlled via serial interfaces available. Through these, a wide range of emulation command sets for other pressure controllers are available. WIKA data sheet CT 28.05 • 01/2016 Page 1 of 7 iWIKAll ^ Part of your business

For communication and data transfer with a PC, the On request, complete mobile or stationary test systems can instrument has an IEEE-488.2, RS-232, USB and Ethernet be manufactured. interface. The digital interfaces enable the software-controlled operation of the controller - such as fully-automated calibration processes or the running of specific test programs generated from LabVIEW® etc.. WIKA data sheet CT 28.05 • 01/2016

WIKA data sheet CT 28.05 • 01/2016

4) Bei waagerechter Aufstellung kalibriert. Approvals and certificates, see website Modular design of the CPC8000-H Due to the modular sensor design, the large pressure range and the ability to exchange the sensors from the front, the CPC8000 precision high-pressure controller offers a maximum degree of flexibility in terms of hardware design or a subsequent sensor expansion. Up to two precision pressure sensors possible The controller offers at least one precision pressure sensor (optionally two), whose calibration data is stored in the sensor (for available ranges, see...

Special features of the CPC8000-H Outstanding control performance The model CPC8000-H high-pressure controller is especially notable for its outstanding control performance. The control unit guarantees fast, simple and overshoot-free control of pressure values with the highest precision and a high control stability. Particularly adaptable to any application The controller has a short warm-up time of approx. 25 minutes. In addition, it can be automatically adapted to the test volume. Bleed priming function The bleed priming function ensures automatic filling (10 ... 12 bar) of the control...

Dimensions in mm (in) Front view Side view (left) 800 (31.5) WIKA-CAL calibration software Easy and fast creation of a high-quality calibration certificate The WIKA-CAL calibration software is used for generating calibration certificates or logger protocols for pressure measuring instruments and is available as a demo version for a cost-free download. A template helps the user and guides him through the creation process of a document. In order to switch from the demo version to a full version of the respective template, a USB key with the template has to be purchased. The pre-installed demo...

Calibration certificates can be created with the Cal-Template and logger protocols can be created with the Log-Template. Cal Demo Generation of calibration certificates limited to 2 measuring points, with automatic initiation of pressures via a pressure controller. Cal Light Generation of calibration certificates with no limitations on measuring points, without automatic initiation of pressures via a pressure controller. Cal Generation of calibration certificates with no limitations on measuring points, with automatic initiation of pressures via a pressure controller. Log Demo Creation of...