![JAQUITH INDUSTRIES INC. - logo](https://img.aeroexpo.online/it/images_ar/logo-p/L168756.gif)
Estratti del catalogo
![L5023 - L5024 & L5026 - 1](https://img.aeroexpo.online/pdf/repository_ar/168756/l5023-l5024-l5026-12959_1m.jpg)
Frangible Mounting Fuse Bolts For Elevated Equipment in the RSA Omni-directional breakaway support system for ground mounted LIR masts where the 3 inch Frangibility rule is required. Fuse Bolts are allowed by FAA Airports ~ AAS-100 & ATO Office. Fuse bolts thread onto 3/4” foundation anchor bolts supplied by Jaquith for LIR MG-20 {L-5023}, MG-30 & MG-40 {L-5024} Masts. L-5026 5/8” dia also available. L-5023 4) .75” dia Fuse Bolt Set ** L5024 6) .75” dia Fuse Bolt Set ** L5026 4) .625” dia Fuse Bolt Set
Aprire il catalogo a pagina 1![L5023 - L5024 & L5026 - 2](https://img.aeroexpo.online/pdf/repository_ar/168756/l5023-l5024-l5026-12959_2m.jpg)
Gary Rixmann/AWA/FAA AJW-46, Lighting Systems Group 11/02/2007 04:17 PM To Whom it May Concern cc bcc Subject Fw: "breakaway anchor bolts" acceptable for use in Runway Safety Area The "breakaway bolts" in the photo below have been third-party tested, evaluated by the FAA Technical Center and accepted by the FAA Airport Engineering Division (AAS-100) for use within the Runway Safety Area (RSA). This is the only breakaway anchor-bolt device that has been determined to satisfy the 3-inch frangible mounting requirement of Federal Aviation Regulations (FAR) Part 139; Paragraph 139.309(b)(4), The...
Aprire il catalogo a pagina 2Tutti i cataloghi e le schede tecniche JAQUITH INDUSTRIES INC.
-
L5015
1 Pagine
-
L5018
1 Pagine
-
L5004
1 Pagine
-
L2763DME
2 Pagine
-
L9149
1 Pagine
-
L5008 & L5009
1 Pagine
-
L5027
1 Pagine
-
L5017FT
1 Pagine
-
L5005
1 Pagine
-
ASDE X Mounts
1 Pagine
-
L9150
1 Pagine
-
L5017
1 Pagine
-
L-5000
1 Pagine
-
lir_option
1 Pagine