BR-450 PRO
1 / 1Pagine

TECHNICAL CHARACTERISTICS Exterior dimensions of the machine mm Useful measurements of the parts grid mm Power of the ultrasonic generator W Ultrasonic work frequency kHz ELECTRICAL CONNECTIONS Supply voltage V 230 - 400 ELEVATOR - With sway system to remove detached dirt from the parts surface Type of elevator Pneumatic OIL PUSH SYSTEM - System to remove oils and prevent fluid against saturation OPS Auxiliary vat capacity L 53 Lid opening mode Manual Thermal insulation Optional TOUCH PANEL AND PLC Size Inches 4.3 Manual and Automatic mode with time slots programming SAFETY EQUIPMENT General switch Security module with emergency stop Separated Extra Low Voltage System Thermal-acoustic insulation STANDARD EQUIPMENT Tank drain valve 1 + 1/2“ Adjustable legs made in stainless steel and rubber Outer panelling built in AISI 304/316. 1.5 mm thickness Vat built in AISI 304/316. 2 mm thickness Chassis built in AISI 304/316 with structural pipe Easy to disassemble to access the equipment for maintenance OPTIONAL EQUIPMENT Automatic water filling and/or dosing of detergent Bath saturation control Filtering systems. Filter press system, cloth system, sleeve system, etc. +34 96 134 11 09 • info@brioultrasonics.com Additional information will be included in the user manual supplied with the BRIO ultrasonic machine. For further information, please, do not hesitate to contact us without any obligation. The information included in this document is only illustrative, it may vary without prior notice to improve our quality and service. Therefore, no contractual relationship is established. The logos, trademarks and data are property of AJ Tecno. Copyright 2019 A&J Tecno Innovacions, S.L. CIF: B98166754 Paterna, Valencia (Spain)