VOX 400
1 / 7Pages

Strong Edge Insert Type Cutter for Cast Iron VOX400 New style face mill for cast iron milling VOX cutter with vertical inserts for ultra high efficiency.

Vertical inserts with high strength cutting edge suitable for a wide range of cast iron rough milling applications Features of Cutter body •High rigidity design Arranging the inserts vertically absorbs the principal cutting force through the thickness of the insert and achieves extremely high rigidity. •Easy to clamp insert Inserts are screwed into the side of the holder, this simplifies clamping and unclamping for superior usability. •Wide selection of bodies VOX400 meets the needs of a wide range of cast iron roughing applications with a coarse pitch type and a high-productivity fine...

Efficient cutting performance The original insert shape with convex cutting edge and shaped relief face offers excellent sharpness and extraordinary fracture resistance. a Fracture resistance Tool : VOX400-080A08R(ø80) Insert : SONX1206PER(MC5020) Workpiece : GGG70 Cutting Speed : 200m/min Feed : -0,6mm/tooth Depth of Cut : ap=5mm, ae=40mm Coolant : Dry Cut Feed per tooth (mm/tooth) a Test results of VP15TF tool life VB depth of wear (mm) Tool : VOX400-080A08R(ø80) Insert : SONX1206PER(VP15TF) Workpiece : GGG70 Cutting Speed : 120m/min Feed : 0.2mm/tooth Depth of Cut : ap=3mm, ae=50mm...

Strong Edge Insert Type Cutter for Cast Iron Right hand tool holder only. WIPER INSERT Order Number

D1 is cutter diameter. • When using wiper insert, please reduce the feed per tooth to half the normal rate.

Strong Edge Insert Type Cutter for Cast Iron • When using wiper insert, please reduce the feed per tooth to half the normal rate. ■ Usable cutting edge width of wiper inserts The width of the wiper insert itself is 5.5mm, however the actual functioning cutting edge width after installation to the body is 4.5mm, as shown in the diagram. With one wiper insert, it is possible to machine up to fr=4mm feed per revolution. When exceeding fr=4mm, use two or more wiper inserts. Note that there is a possibility to exceed fr=4mm when using a holder with more than 24 inserts.

•With reference to the above examples, adjust the cutting conditions according to the machine specifications, workpiece geometry and clamping method used.