VF-7/40
1 / 1Pages

Extraits du catalogue

Haas Technical Publications Foundation Line Note: Foundation must extend at least 1 Ft. (305 mm) from bored holes. Reference ES0039 Machine Clearance Heights Two-Step Operator Platform included (not shown) Length: 72.5" (1842 mm) Width: 23.5" (570 mm) Height: 12.5" (318 mm) ** Extended Z-Axis Clearance Option add 8" (203 mm) 95 Gallon (360 L) Coolant Tank 47" x 84" (1194 mm x 2134 mm) Door Open Base Casting Side-Mount Tool Changer Arm Tool Gage Line Tool Change Position 4.5" (114 mm) 34" ** (864 mm) Max. Z-Axis Clearance to Table MILL TABLE (at home position) SIZE: 84" x 28" (2134 mm x 711 mm) TRAVEL: 84" x 32" (2134 mm x 813 mm) 180" (4572 mm) Enclosure Usable Work Space NOTES: 1. TABLE POSITION(S) AT MAX X & Y TRAVELS. 2. MEASUREMENTS ARE FROM THE EDGE OF MILL TABLE TO NEAREST OBSTRUCTION (ie. ENCLOSURE, WAY COVER, DOORS, ETC.). 3. DIMENSIONS ARE REDUCED AS HEIGHT ABOVE TABLE INCREASES; ie. FRONT OF ENCLOSURE IS SLOPED 5° INWARD FROM BOTTOM TO TOP. DIMENSIONS SHOWN ARE AT TABLE TOP HEIGHT. Spindle Ø5.2" (Ø132 mm) Distance Between Cartridge and Table at Max. X-Axis Travel is 2.6" (66 mm) Detail C Front View VF-7/40 Enclosure Usable Work Space VF-7/40 Layout Drawing Revision E November 13, 2013 © 2013 Haas Automation

Ouvrir le catalogue en page 1

VF-7/40 1 / 1Pages

Extraits du catalogue

Tous les catalogues et fiches techniques (PDF) HAAS AUTOMATION

VF-7/40
1 / 1Pages