Catalogues >
EOS GmbH Electro Optical Systems >
Laser Sintering System with Two Lasers for the Production of Large Parts and for Industrial High-Throughput Manufacturing

Laser Sintering System with Two Lasers for the Production of Large Parts and for Industrial High-Throughput Manufacturing
1 / 2Pages

Extraits du catalogue

Laser Sintering System with Two Lasers for the Production of Large Parts and for Industrial High-Throughput Manufacturing - 1

Polymer Solutions Laser Sintering System with Two Lasers for the Production of Large Parts and for Industrial High-Throughput Manufacturing e-Manufacturing Solutions

Ouvrir le catalogue en page 1

Laser Sintering System with Two Lasers for the Production of Large Parts and for Industrial High-Throughput Manufacturing - 2

With the largest build volume available on the market, the EOS system enables the production of parts of up to one meter in length. Thanks to its new hardware and software features, the EOS P 770 is up to 20% more productive than its predecessor. High productivity with low cost per part and homogeneous part properties • Thanks to optimized temperature management, improved recoating speed and high-power lasers, the build time and cost per part are reduced significantly. • The improved digital scanners achieve a considerably higher laser accuracy compared to the previous version of the...

Ouvrir le catalogue en page 2