TDC1-PIR
1 / 2Pages

TDC1 SeriesLow-Power Non-Intrusive PIR Traffic Detectors for Single Lane Traffic Data Acquisition Features • Ultra low power consumption < 60 mW, ideal for solar powered installations • Multi channel PIR detection Total of five detection zones • Vehicle classification by length 3 standard classes, up to 5 vehicle classes possible (depending on customer length threshold setting) • Auto calibration Auto calibration using mounting height and distance to the centre of the observed lane via dedicated commissioning software • Wide mounting height range Mounting height between 5.5 m and 18 m (max. offset 45° from detector's mounting location to the centre of the observed lane), Application-dependent limitations apply. • Detection of standing vehicles • Detection of wrong-way drivers • Wide operating temperature range (-40 to +70°C (-40 to +158°F) Optimal performance in all weather and climate conditions • Remote configuration and setup With dedicated commissioning and installation software The TDC1 Series are advanced traffic detectors using Passive Infrared technology. Comprehensive traffic data including individual vehicle class, speed, length, occupancy time and time gap are provided via RS 485 databus. Typical Applications ADEC TDC1 Series detectors are specifically designed for a variety of Traffic Data Collection and traffic control applications where low power consumption is required: • Vehicle counting (volume) • Individual vehicle speed • Vehicle classification • Presence detection Working principle TDC1 traffic detectors employ multiple PIR detection zones. A combination of static and dynamic detection channels form a total of five detection zones. The thermal radiation contrast of a vehicle moving into or through the detection zones against the background radiation of the road surface correlates to the passage or presence of a vehicle. The sophisticated signal processing transforms the sensors analog data into digital information for each event without the need for external computing equipment. Mounting Recommended mounting points are gantries, overpasses or bridges or alternatively on a pole at the roadside. Clearly superior performance and reliability are a result of: • Multi-channel PIR detection • Full temperature compensation across entire temperature range • Sophisticated algorithms eliminating impact of environmental changes ADEC Technologies AG • Gublenstrasse 1 • CH-8733 Eschenbach SG^ Switzerland • www.adec-techno

Accessories (Sold Separately) Electrical For the communication between detectors and a PC during commissioning and maintenance an interface module in combination with the dedicated software is necessary. The interface module and software have to be ordered separately. USB IF 485: Order Number 12501 Mounting Accessories Mechanical Dimensions Important: Data is based on samples and believed to be representative. Design and specification changes reserved without prior notice. For more specific information on the products, their installation and application please refer to the installation...