AXON
1 / 3Pages

AXON LED ICAO Approach Centerline, Crossbar and Siderow Unidirectional Inset 12‑inch Compliance with Standards (current version) Fully dimmable lights, conforming to the dimming curve of traditional halogen lights Low protrusion, high-intensity, Style 3 (≤ 6.35 mm) inset light fixtures No negative slope in front of the prisms Fully encapsulated all-in-one universal power supplies for Runway, Taxiway, Approach and Omni inset families Latest generation LEDs providing a long-lasting light source with high efficiency and low power consumption Reinforced top cover substantially exceeding standards to improve durability and longevity One single family of fixtures covering all runway, taxiway and approach applications IP68 rated enclosure designed for harsh environments; all fastenings are stainless steel Reinforced prism available as an option Compatible with existing infrastructure allowing for direct replacement of existing LED inset fixtures Uses ICAO • Approach centerline Approach crossbar Approach siderow EQ has an integrated ILCMS remote for use with the LINC 360 system providing high data capacity and resisting degradation from various types of radio effects to provide a superior communication platform Precision aimed optics enhancing photometric performance and complementing extended LED life Reduced bottom pan profile allowing for very shallow base can installation LED pulse width modulated (PWM) at 400 Hz optimizing LED performance and eliminating perceptible flicker to a moving human observer throughout the range of brightness steps Operates at all steps of constant current regulator technologies designed in compliance with IEC or FAA requirements Improved mechanical design to strengthen and consolidate components, improving the customer maintenance experience Fail-open option for compatibility with legacy monitoring systems and optimization of advanced control and monitoring systems Failed-LED Detection as required by Engineering Brief 67D Robust lightning protection complying with ANSI/IEEE C62.41-1991; Location Category C2 as required by FAA Eng. Brief 67 Category C2 is defined as a 1.2/50 μS – 8/20 μS combination wave, with a peak

AXON Ordering Code Notes Color - Side 1 (Left) Color – Side 2 (Right) Beam Orientation Market Specific Ordering Code Includes standards NATO, EASA, STAC, TP 312 and MOS 139. All Style 1 corded fixtures will include a ground lug. All Style 6 or 3-pole corded fixtures will be provided without a ground lug UNLESS digit 6 is option 1 "BAP". This application meets the heat rise requirements in Engineering Brief 67D, section 2.13.1, "Arctic Kit Testing Requirements" WITHOUT an arctic kit. We do not offer an arctic kit with this configuration as the additional heat would be detrimental to the life...

AXON Operating Conditions Operating temperature Storage temperature ANNEX 12-inch light fixtures without Arctic Kit Fixture type – 1 cord set Isolation transformer Fixture load Approach Centerline Approach Siderow Note: Values provided are for the "S" option non-monitored power only. Note: • EQ fixtures: ◦ The isolation transformer must have an additional 8 VA available above the fixture load for communication bandwidth. Size transformer to next size up to assure additional 8 VA coverage ◦ Legacy BRITE II or AGLAS 2 systems — Order "M" power supply Fail-open fixtures: ◦ The maximum rating...