RV-12
1 / 7Páginas

Extractos del catálogo

WEIGHT & BALANCE GENERAL INSTALLED EQUIPMENT LIST SAMPLE LOADING PROBLEM LOADING GRAPH FLIGHT ENVELOPE GENERAL It is the pilot’s responsibility to ensure that the aircraft is loaded properly and within the weight and balance limitations. All flight performance, procedures and characteristics are based on this prerequisite. The actual licensed empty weight and CG of a specific aircraft can be found on the Weight and Balance Form and the Operating Limitations Card, both of which are a permanent part of the aircraft’s file. All additional changes to the aircraft’s empty weight and CG after the time of manufacture must also be attached to or indicated on both forms. From this information and the following instructions, the pilot can easily determine the useful load and proper loading distribution for the aircraft.

Abrir la página 1 del catálogo

INSTALLED EQUIPMENT LIST

Abrir la página 2 del catálogo

SAMPLE LOADING PROBLEM

Abrir la página 3 del catálogo

YOUR AIRPLANE

Abrir la página 4 del catálogo

FIGURE 4-1 LOADING GRAPH RV-12

Abrir la página 5 del catálogo

FIGURE 4-2 FLGHT ENVELOPE

Abrir la página 6 del catálogo

EMPTY WEIGHT =lb EMPTY ARM =inches (W1 + W2 + W3) (Empty Moment / Empty Weight) EMPTY MOMENT =in-lb (M1 + M2 + M3) printed name Aircraft measured, weighed, and worksheet filled-out by: Signature:

Abrir la página 7 del catálogo