Catálogos >
SMW-AUTOBLOK >
AcuGrind

AcuGrind
1 / 5Páginas

Extractos del catálogo

High precision air chuck Ø 80 - 250 mm AcuGrind  with built-in pneumatic actuating cylinder  fully sealed Application/customers beneﬁts • Sealed standard chuck for high-precision turning and grinding • Highest accuracy - runout and repeatability • Built-in pneumatic actuation, no hydraulic cylinder required Technical features • Base jaws case hardened • Repeatability < 0.002 mm • prooﬂine® chucks = fully sealed - low maintenance Standard equipment Odering example Power chuck Boring ring for I.D. clamping Boring ring for O.D. clamping Lubricating oil Tapped holes in the face are optional. fully sealed – low maintenance Subject to technical changes. For more detailed information please ask for customer drawing. Technical data SMW-AUTOBLOK Type Order number Chuck mounting bolts Operating pressure

Abrir la página 1 del catálogo

Top jaws for AcuGrind power chucks Top jaws for AcuGrind Top jaws in special version on request.

Abrir la página 2 del catálogo

Ordering example In case of an order of the air feed tubes type AP, the length of the air feed tube is necessary. For calculating the correct length of the air feed tube (LR) are the following dimensions necessary: LS, E, C, D and the chuck type! Use only with clean and oiled air. SMW-AUTOBLOK

Abrir la página 3 del catálogo

Air feed tubes flex (APFL)

Abrir la página 4 del catálogo

High precision air chucks Chuck sizes Ø 80 - 250 mm ■ For OD and ID clamping ■ Built-in pneumatic actuation, no hydraulic cylinder required ■ For universal grinding applications

Abrir la página 5 del catálogo