Catálogos >
SECO/WARWICK DO BRASIL LTDA >
R&D CAB Brazing Center for All Aluminium Heat Exchangers

R&D CAB Brazing Center for All Aluminium Heat Exchangers
1 / 2Páginas

Extractos del catálogo

R&D CAB Brazing Center for All Aluminium Heat Exchangers - 1

R&D CAB Brazing Center for All Aluminium Heat Exchangers BRING your core. We will braze it! Reduce your investment risk by taking advantage of the SECO/WARWICK Brazing Center. SECO/WARWICK Europe operates a fully equipped Brazing Center to support our customers by allowing them to run trials and prototypes of a wide variety of heat exchangers. The Center can then model and document complete process information and control recipes for your production requirements. The Brazing Center can perform double duty as a center for employee training. Customers may also purchase furnace time to run production on a cost-plus basis.

Abrir la página 1 del catálogo

R&D CAB Brazing Center for All Aluminium Heat Exchangers - 2

(^OIWARWIMT) SECO/WARWICK Group Brazing Center The Brazing Center is fully equipped with an Active Only® CAB Brazing system, wet fluxer, thermal degreasing / drying / debinding / oven to allow customers to utilize a complete operational manufacturing cell. The test furnace can handle loads up to 1500 mm wide x 2500 mm long x 450 mm high (59 inch x 98 inch x 17 inch). ■ Why Active Only? The Active Only® furnace offers these unique process benefits for large cores: □ The semi-continuous process configuration allows us to heat and cool even very large condensers at one time. □ Convection...

Abrir la página 2 del catálogo