Fatigue-Test-System-for-wheel-set-axles
1 / 4Páginas

Q> Fatigue Test System for solid wheels and wheel set axles IP60

RMS Fatigue Test System IP60 for railway wheel sets Wheels and wheel sets of freight and passenger trains are exposed to high dynamic loads. By the weight affecting the wheel bearing, a rotating bending load of the wheel set axle arises during operation. All other connected components in the wheel are highly stressed as well by this load. Using an unbalance exciter, a rotating load on the upper end of the wheel set axle will be generated. Via the length of wheel set axle, this rotating load generates a rotating bending moment of up to 80 kNm. Testing frequency may be influenced by...

Movable control cabinet Unbalance drive Computer monitor Revolution speed Test item Data acquisition Signal amplifier for 16 x strain gauges Measuring plane IMotor Ustell Signal amplifier 5 x TF DMS Vibration foundation PC with Famos Legend Black = standard Red = optional Example of Wheel set Fatigue Test System with control computer Vibration foundations Besides electro-technical equipment, RMS also provides planning of vibration foundations:: complete planning and projecting for vibration foundations constructive layout dynamic and static design with formwork and reinforcement drawings...

Headquarters Hamburg /Germany] ANSCHRIFT / CONTACT RMS Regelungs- und Messtechnik Dynamic Test Systems Gutenbergstrasse 27 21465 Reinbek / Hamburg Germany Tel.: +49 (0)40 727 603-0 Fax: +49 (0)40 722 30 66 info@rms-testsystems.de www.rms-testsystems.de IP60-V2-EN-38/05/16