Catálogos >
Jiangsu Tianyi Aviation Industry Co., Ltd. >
Tianyi Boarding stairs WTJ3600DKT

Tianyi Boarding stairs WTJ3600DKT
1 / 3Páginas

Extractos del catálogo

PASSENGER STAIRS (HAND-PUSHED) WTJ3600TKT / WTJ4400TKT Passenger stairs (hand-pushed) is composed of door moving assembly, guard plate assembly, ladder body assembly, lifting mechanism, bottom frame assembly, platform assembly, tail ladder assembly, etc. The ladder structure is vertical plate type. When the boarding ladder goes up and down, the upper and lower stairs move in parallel four sides, and the height of the platform varies from 2025 to 4400mm. A318 、A319 、A320 、A321 、A330 、A340 、B707 、B727 、B737 、 C919 、 DC-8/40/SOF 、DCS-61/61F 、 DC862/62F、DC8-63/63F 、1L-18. Chassis models： Passenger lift height mm： Height adjustment mode： Step parallelogram displacement Technical Specifications： Passenger elevator working height (mm)： 3200～4400 / 2025~3440 / 2500～3650 Step Dimension (L x W x H) mm： 300×1120×（140～200） Curb weight kg ：2100 / 1980 / 1750 Channel circle outer diameter (mm)： 17500 / 9400 Overall dimensions (L × W × H) (mm)： 8280×2230×3630 / 7000*2100*3250 6965×2230×3650 Maximum tilt Angle of ladder body ( 。) ：38~39 Number of steps ：16~21 Additional Options : Available upon request Email:joinsun@jstianyi.com.cn / Airport.GSE@jstianyi.com.cn Web:www.tianyi gse.com Add: No. 1218 Huateng Ro

Abrir la página 1 del catálogo

PASSENGER STAIRS(HAND-PUSHED) Guard Both sides of the guard plate is composed of guard plate skeleton, railing assembly, interior and exterior decorative board, ladder body lighting, etc Ladder body assy The ladder body assembly is mainly composed of upper and lower longitudinal beam, step fixing frame, step plate, etc Platform assembly The platform assembly is mainly composed of platform skeleton, movable platform, anti-collision pipe, warning light, LED light, lighting, etc Lifting mechanism Lifting mechanism is mainly composed of the door frame, pedal hydraulic oil cylinder, guide pin...

Abrir la página 2 del catálogo

Technical requirements: 1. Weld firmly, clean up the welding slag after welding, and polish smooth. 2. Anti-rust treatment, white paint. 3. Fastener connection fastening, no free loosening and other phenomena. 4. The rotating parts rotate flexibly, without clamping and other phenomena. 5. After assembly, inject calcium-based No.2 grease where necessary. EmaM:joinsun@jstianyi.com.cn / Airport.GSE@jstianyi.com.cn Web:www.tianyi gse.com Add: No. 1218 Huateng Road, Qingpu Distnghang Road, Jianhu City, Jiangsu Province, China 13

Abrir la página 3 del catálogo