Catálogos >
Hughey and Phillips >
Field Lightning Arrestor

Field Lightning Arrestor
1 / 1Páginas

Extractos del catálogo

Field Lightning Arrestor POWER & CONTROL EQUIPMENT - 4.9 ORDERING INFORMATION Description Part Number WEIGHT AND DIMENSIONS Weight: Dimensions: Length Height Depth 5.91 inches 5.91 inches 3.94 inches COMPLIANCES Exceeds requirements of AC 150/5345-10 (current edition), Section 3.4.12 (Lightning/Surge Arrestors) PRODUCT APPLICATION The Astronics DME Field Lightning Arrestor is designed to help provide circuit protection from transient activity (such as lightning strikes or power surges) that can potentially damage lighting fixtures on an airfield and equipment located in an electrical vault. It is recommended that arrestor units be installed on the 5kV primary series circuit, starting as close to the vault as possible and then approximately every 2,000 feet (600m). Arrestors may be installed at closer intervals, if desired, to further reduce the risk of lightning/surge damage. FEATURES • May be installed on any airfield circuit (6.6A from 4 kW to 30 kW and 20A from 15 kW to 70 kW). • No maintenance required. If a unit fails, simply replace it with a new one. • A unit may be installed in a base can or direct earth buried. • The enclosure is made from fiberglass-reinforced plastic and is waterproof (meets IP68). • Arrestors are compatible with all types of Constant Current Regulators, light fixtures (Quartz and LED), and isolation transformers. • A ¼”-20 stainless steel stud provides solid ground connection for #6 AWG or larger ground wire. • Maximum continuous operating voltage: 5000VAC • Series resistance: “0” Ohms • Peak surge current: 25kA 6830 NW 16th Terrace • Ft. Lauderdale, FL 33309 USA Phone: 1.954.975.2100 • E-mail: DMEairfieldSALES@astronics.com www.astronics.com/airfieldlighting Actual product specifications may have changed since the printing of this brochure. Brochure specifications are not binding. Confirm current specifications at time of order.

Abrir la página 1 del catálogo