
Extractos del catálogo

DM-1 Machine Layout Drawing Note: Foundation must extend from bored holes. Machine Front 6X Leveling Pad Pin Dimension Door Open Control Cabinet Note: Drawing is formatted for 11” x 1T Drawing will print to 8.5” x IT
Abrir la página 1 del catálogo
DM-1 Machine Layout Drawing 1 Electrical Connection 2 Air Connection 95.0" (2413 mm) Tallest Point As Shipped Double Arm drops 4.5" (114mm) during tool change Tool Change Position 8" (203 mm) 15.5" (394 mm) Z-Axis Travel 2X 7" (178 mm) 60" (1524 mm) Enclosure Work Space Front View 1.0" (25 mm) 41" (1041 mm) Enclosure Work Space Mill Table (Home Position) Size: 26" x 15" (660 x 381 mm) Travel: 20" x 16" (508 x 406 mm) 60" (1524 mm) Enclosure Work Space Top View DM-1 Revision E Page 2 of 3 May 2016 Note: Drawing is formatted for 11” x 17” Drawing will print to 8.5” x
Abrir la página 2 del catálogo
DM-1 Machine Layout Drawing 26.0" (660.4 mm) DM-1 Revision E Page 3 of 3 May 2016 Note: Drawing is formatted for 11” x 17” Drawing will print to 8.5
Abrir la página 3 del catálogoTodos los catálogos y folletos técnicos HAAS AUTOMATION
-
ROTARIES & INDEXERS
4 Páginas
-
Vertical Mills Universal Series
2 Páginas
-
SuperSpeed-VF
4 Páginas
-
Lathes Dual-Spindle Series
2 Páginas
-
WIPS
62 Páginas
-
Lathe Operator’s Manual
456 Páginas
-
Haas Bar Feeder
62 Páginas
-
Compact Mill
34 Páginas
-
Chucker Lathe
62 Páginas
-
HA5C
1 Páginas
-
HA2TS Machine
1 Páginas
-
VF-7/40
1 Páginas
-
DM-2
4 Páginas
-
VF-1YT
5 Páginas
-
VF-1
5 Páginas