SmartStrobe
1 / 13Páginas

SmartStrobe INSTALLATION MANUAL AVE-IS30ANCSAS-02G-IM © 2015 Aveo Engineering Group, s.r.o. All rights reserved. The information contained within this document must not be disclosed, copied or reproduced in whole or in part without prior written permission from Aveo Engineering Group, s.r.o. Distribution of this document shall only be as stated in Table 02 unless otherwise agreed by Aveo Engineering Group, s.r.o.

INSTALLATION MANUAL Manual Administration

INSTALLATION MANUAL 0.2 Document approval This document has been established in accordance with an alternative procedure to DOA approved under EASA AP429. This installation manual is according EASA ETSO [Authorization number] and applicable for part number AVE-IS30ANCSAS-02G 01. – Jul - 2014 Petr Jaroš Engineer, Aveo Engineering Group, s.r.o. 01. – Jul - 2014 Georg Hartl Head of DO, Aveo Engineering Group, s.r.o. 0.3 Amendment Record procedure The master copy of this document shall be kept electronically as a read only document under the control of Aveo Engineering Group, s.r.o. as Master...

INSTALLATION MANUAL ALL pages affected by ANY raise of issue of this manual will be listed in Table 01 - Effected Pages Column. The reason(s) for ALL raise of issue and description of change due to raise of issue will be provided for ALL raises of issue in Table 01 - Details Column. Changes from the previous issue are highlighted by YELLOW HIGHLIGHTING over new content. AND YELLOW HIGHLIGHTING AND CROSSING OUT of deleted content. Example (CROSSING OUT) As stated in 0.3 above; the master copy of this document shall be kept electronically as a read only document under the control of Aveo...

INSTALLATION MANUAL 1. PRODUCT INFO SmartStrobe™ is a LED anticollision light assembly ETSO Compliant anticollision lights, low drag and low profile designed for aircrafts wing position light. This powerful LED light system features easy installation, fail safe system, unbreakable construction, waterproof and high candela output. SmartStrobe™ also is a Drop-In replacement strobe light to the Honeywell Part No. 302446-3, Wingtip Strobe Light. It operates at 115 VAC supply voltage. The SmartStrobe™ also features the exclusive Aveo LEDCheck™ technology, a real time indicator of operational...

INSTALLATION MANUAL 4. CONTROL & POWER INPUT’s: BLACK WIRE Strobe Power Section line (Line) GREEN WIRE Negative common power supply line (Earth) WHITE WIRE Carries current in normal operation, connected to Earth (Neutral) BLUE WIRE Strobe synchronization line (Sync) 5. TECHNICAL SPECIFICATION Dimensions (mm): Dimensions (inches): Operating voltage range: Primary input voltage: Over-voltage protection: Maximum Input current at 115V: Over-Voltage shut down: Under-Voltage protection: Operating temperature: Over-Temperature protection: Output power cool white

INSTALLATION MANUAL *dimensions in [inches] millimeters

INSTALLATION MANUAL 7. WIRING SIZE CHART 8. EQUIPMENT LIMITATION SmartStrobe™ should only be powered by 115V AC power input 9. TESTING THE FUNCTION OF THE AVEO LIGHTS BEFORE INSTALLATION All Aveo Aviation lights undergo rigorous testing prior to being released from our engineering manufacturing department. This testing involves a burn-in time as well as other function testing. No light is released for sale without undergoing this extensive operational testing. When you receive the SmartStrobe light, and wish to test the function of the light prior to installation on your aircraft, please...

INSTALLATION MANUAL 2. Remove the light from the package. Note that there is no connector: – line lead, Black wire – neutral lead, White wire earth lead, Green wire synchronization lead, Blue wire 3. Testing of the function of the light can be done with a 96 – 129 VAC, 360 – 440 Hz power supply. Connect green wire to Earth. Connect the white wire to the Neutral lead of the power supply, then connect the black wire to the Line leads on the power supply. Switch ON power to the harnesses, the anti-collision light should start flashing after LED check finished self test function. Connecting the...

INSTALLATION MANUAL Spread the tightening forces evenly around the mounting hole. Stainless steel screws is recommended. Length depends upon placement location on aircraft. 12. CONTINUED AIRWORTHINESS INSTRUCTIONS The Aveo SmartStrobe lights should always be checked for proper operation during preflight. This procedural information is already provided in all general aviation aircraft flight manuals. The lights should be visually inspected for general condition, proper operation, and correct installation at each annual and/or 100 hour inspection. Turn the lights on, and do the following: Put...

INSTALLATION MANUAL TABLE: LED check function description If any of the conditions as indicated on the diagram are exceeded, the light shall be removed and sent to Aveo Engineering for replacement under the Aveo Lifetime Warranty Program. The maximum number of LEDs that may fail to remain ETSO legal intensity for flight is TWO LEDs (not in one section). FIGURE 2: STROBE LEDS - ALL LEDS (30 pcs)

INSTALLATION MANUAL FIGURE 3: STROBE LEDS - SECTIONS (2x15 pcs)

INSTALLATION MANUAL FIGURE 4: 2 LEDS may fail to remain ETSO legal intensity for flight (not in one section)