TrakkaCam TC-300-S
1 / 2Seiten

CRITICAL VISION TECHNOLOGY A NEW-GENERATION OF COMPACT HIGH PERFORMANCE MULTI SENSOR SURVEILLANCE SYSTEMS Ideally suited for a variety of airborne missions, including law enforcement, search and rescue, civil protection, military ISR and force protection, as well as manned and unmanned platforms and installations. TRAKKA SYSTEMS TC SERIES The new TC series from Trakka Systems features advanced technology in an ergonomic industrial design that sets new standards for compact, high-performance, multispectral imaging in a non-ITAR single-LRU configuration. The sytems EO/IR sensors are augmented with sophisticated image processing, allowing users to see through conditions such as fog, haze, low light, and total darkness. Image blending provides the ability to exploit imagery from the different sensors and extract details that would otherwise go undetected by a single sensor. A host of image processing features to improve operator performance and reduce workload, such as Moving Target Detection (MTI), are embedded right into the system. The TC-300-S has enhanced interfaces that provide easy integration with 3rd party equipment. Unlike competing imagers, the TC-300-S integrates advanced features like dual-stream H.264/H.265 video with KLV metadata over ethernet right into the system, removing the need for external encoders and enabling simplified integration with Moving Map and datalink systems. The TC-300-S enables operators and command centers to share mission-critical information in real-time while providing enhanced situational awareness via augmented reality overlays or pure synthetic views. KEY BENEFITS • Performance better than 10” competitors, and approaching that of bigger systems, but at lower price / lower mass • Advanced sensors, superior in size class: - Available with a full suite of 7 payload options: (IR, HDTV, LRF, LP, LI, A/T, IMU/GPS) - Continuous optical zoom on all imaging channels for maximum situational awareness - Open upgradeable architecture for incorporation of new technology sensors • The advanced real-time digital HD image processing engine is embedded in gimbal and requires no additional electronics unit • Moving Target Detection (MTI) embeded directly into the system • High performance 4-axis active gyro stabilization with integrated 6-axis passive isolation for superior image stabilization • Fully integrated IMU/INS providing Geo Location and Geo Hold, with easy Moving Maps integration • Innovative and ergonomic system design provides flexible platform and installation options • Compact Single-LRU configuration is easy to install, integrate and requires no junction box • Non-ITAR exportable product • RTCA DO-160 Tested for Environmental, Electromagnetic and Mechanical compliance, and capable of withstanding the h

GIMBAL SPECIFICATIONS Weight Continuous Azimuth 4 axis, active gyro-stabilization with integrated 6 axis passive isolation THERMAL IMAGER Type Resolution Fields of View Sensor Type Resolution Fields of View LLTV Mode 3-5pm MWIR array 640x512 (1280x720 optional) 30° to 1.28° (H D Option 40° to 2.4°), continuous zoom Cooled HD CMOS Global Shutter LASER RANGE FINDER (OPTIONAL) Wavelength 1535nm, Eye-safe Repetition Rate 0.5 Hz or Single-Shot Modes Wavelength Output Power Wavelength Output Power Max power 320W Maximum Power Steady State Power 100W Steady State Input Voltage 22-36V Wide-Range...