Kataloge >
SMW-AUTOBLOK >
WPS ZeroAct

WPS ZeroAct
1 / 5Seiten

Katalogauszüge

WPS ZeroAct Description of function: Centering cone and flat support Central manual quick actuation on both sides (270° rotation) Flexible mounting fully sealed – low maintenance ZeroAct module fully sealed and low maintenance Mounting options: View from below: Mounting from above with mounting screw/ fitting screw 4x Ø12H7 Fixing with clamps Centering on a grid plate by pass diameter Ø25H7 (compatible to W

Katalog auf Seite 1 öffnen

Up to 3 ZeroAct modules could be connected in a row with central actuation: Connecting bolt Central actuation for both clamping modules (2nd side) ZeroAct clamping module 2 SW 10 ZeroAct clamping module 1 Central actuation for both clamping modules (up to 3 clamping modules connectable) Application examples for connecting up to 3 clamping modules with central acuation: 2 ZeroAct clamping modules in a row, grid dimension 200 mm 4 ZeroAct clamping modules (2x2 modules in a row), grid dimension 200 mm 6 ZeroAct clamping modules (2x3 modules in a row), grid dimension 200 mm 4 ZeroAct clamping...

Katalog auf Seite 2 öffnen

Clamping module■ Cennectable flexible zero point clamping module ■ Fully sealed_ Application/customer benefits • Up to 3 ZeroAct modules could be connected in a row with central actuation • Single quick-actuation for the rapid opening and closing of the modules with only 270° rotation • Extremly flat design • Huge reduction of set-up times for highest efficiency • Safe workpiece clamping with maximum holding forces and highest repeatability • Flexible configurations for customized use • 4 indexing slots • Interchangeable to the proven zero point system APS / WPS Technical features •...

Katalog auf Seite 3 öffnen

■ Clamping pins 1 piece ZeroAct Manual Zero Point Module Application/customer benefits • Fixation and positioning on the clamping system WPS • Wear-resistant due to an extra hard protective coating • Large entry radius of the clamping pins for easy and safe loading Technical features • Centering pin Type A (Standard) • Sword pin Type B (Positioning pin) • Clamping pin Type C (with centering play 0.1 mm) Standard equipment Clamping pin with mounting screw Order review Type

Katalog auf Seite 4 öffnen