LIFT INVERTERS – EMERGENCY POWER FOR LIFTS
1 / 4Seiten

{{requestButtons}}

Katalogauszüge

LIFT INVERTERS – EMERGENCY POWER FOR LIFTS - 1

SINEPOWER’s LIFT INVERTERS (LI’S) have been designed to supply power to emergency evacuation lifts when the mains power supply fails. Lift inverters are intended for use in all types of public buildings including: • Schools / Universities • Libraries • Shopping Malls • Office Buildings • Airport Terminals • Hotels Sinepower Zona Industrial do Mamodeiro Rua Augusto Marques Branco, Lote 21-A 3810-783 Aveiro, Portugal COM.CAT.EN.LI.05.16/11 E-mail: sinepower@sinepower.pt

Katalog auf Seite 1 öffnen
LIFT INVERTERS – EMERGENCY POWER FOR LIFTS - 2

SINEPOWER’s LIFT INVERTERS (LI’S) can be used on any dedicated emergency evacuation lift as a standby power system guaranteeing a minimum of ten upward and ten downward journeys. In an emergency evacuation situation or when the mains power supply fails SINEPOWER’s LIFT INVERTERS (LI’S) can be activated by authorised personal. CE Mark Certified (IEC 61000-6-4:2006+AMD1:2010 - Electromagnetic compatibility (EMC). Part 6-4: Generic standards - Emission standard for industrial environments; IEC 61000-6-2:2016 - Electromagnetic compatibility (EMC). Part 6-2: Generic standards - Immunity for...

Katalog auf Seite 2 öffnen
LIFT INVERTERS – EMERGENCY POWER FOR LIFTS - 3

POWER QUALITY • • • • • CHARGER State of the art semiconductor technology (IGBT) Rectifier Power Factor Correction (PF=1) 95% efficiency 4 Quadrant Operation (better response of the system and safer operation for NBPT) Low input harmonics (< 3 % THDi), to comply with the strictest regulations @ any load. OUTPUT • 4 Quadrant Operation • Vector control Inverter for better response and higher efficiency. EFFICIENCY • Up to 95% • Green Standby Function - losses: 20 W • No load losses: <0.5 kW. PROTECTION AND SAFETY Over/under voltage at output Overload capability designed for: • Power stage...

Katalog auf Seite 3 öffnen
LIFT INVERTERS – EMERGENCY POWER FOR LIFTS - 4

SPECIFICATIONS INPUT CHARGER 1 phase 230V AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15%* 45Hz up to 65Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input current harmonics . . . . . . . . . . . . <3% @ 100% load OUTPUT 3 phase 400VAC/480VAC . . . . . . . . . . . . . . . . . . . . . . . . . 1%* Overall Efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87%-95% Max. Crest Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:1 CHARGER 4 Quadrant Operation AC Voltage Range . . . ....

Katalog auf Seite 4 öffnen

Alle Kataloge und technischen Broschüren von Sinepower

  1. SINE SFC

    4 Seiten

  2. SINE33I-GPU

    4 Seiten

Archivierte Kataloge