T-Carb
1 / 12Seiten

Solid Carbide Tools High Speed Machining Trochoidal Milling

T-Carb 6-Flute High Performance End Mills are ideal for aggressive high speed machining using Trochoidal and Peel Milling techniques. The additional flutes allow higher feed rates at reduced tool loads, ultimately preventing breakage and failure. The variable pitch geometry allows the T-Carb to excel in multiple operations calling for aggressive roughing and finishing, resulting in faster cycle times and lower costs. The new series is offered in a variety of length, neck and corner radius options and is coated with Ti-NAMITE-X for ultimate thermal barrier protection. Titanium T-CARB HIGH...

FEATURES & BENEFITS • Incorporates unique 6-Flute design for High Speed Machining operations requiring high accuracy and less deflection • Designed for aggressive ramping at high speeds where evacuation and load might be a factor • Engineered for High Speed Milling using Trochoidal and Peel Milling techniques • Exceptional performance with minimal deflection in difficult materials such as titanium alloys and stainless steels • Eccentric relief provides superior strength and smoother surface finish • Variable Flute Geometry maximizes productivity and tool life by reducing the harmful...

TOLERANCES (inch) Cutting Diameter

TOLERANCES (inch)

Cutting Diameter corner Radius R

Cutting Diameter Corner Radius R

Series 51  |  Speed & Feed Recommendations Hardness BRINELL Stainless Steel (Difficult) 304, 304L,316, 316L Stainless Steel (PH) 13-8 PH,15-5PH,17-4 PH, Custom 450 Diameter (inch)

Series 51  |  Speed & Feed Recommendations Hardness BRINELL Nickel, Cobalt and Iron Based Superalloys Inconel 601, 617, 625, Incoly 800, Monel 400 Nickel, Cobalt and Iron Based Superalloys (DifFicult) Inconel 718, 750X, Incoly 925, Waspaloy, Hastelloy, Rene Titanium Base Alloy Pure Ttanium, Ti6Al4V, Ti6Al2Sn4Zr2Mo, Ti4Al4Mo2Sn0.5Si Titanium Base Alloy (DifFicult) E Diameter (inch) *Maximum recommended depth shown *Finish cuts typically require reduced Feed and Cutting Speeds; also the Radial Width of Cut recommended is not more than 2% x D1 *Reduce Speed & Feed for materials harder than...

Series 51 | Speed & Feed Recommendations BRINELL Coolant Metric ^ Ap & Vc ApxDI AexDI (m/min) STAINLESS STEEL (PH) E 13-8 PH,15-5PH,17-4 PH, Custom 450

BRINELL Coolant Metric ftApMt Me ApxDI AexDI (m/min) Diameter (inch) NICKEL, COBALT AND IRON BASED SUPERALLOYS Inconel 601, 617, 625, incoly 800, Monel 400 nickel, cobalt AND IRON BASED SuPERALLOYS (difficult) inconel 718, 750X, incoly 925, Waspaloy, Hastelloy, Rene titanium base alloy Pure Ttanium, Ti6Al4V, Ti6Al2Sn4Zr2Mo, Ti4Al4Mo2Sn0.5Si ‘Maximum recommended depth shown ‘Finish cuts typically require reduced Feed and Cutting Speeds; also the Radial Width of Cut recommended is not more than 2% x D1 ‘Reduce Speed & Feed for materials harder than listed ‘Above recommendations are based...

Solid Carbide Tools Performance by Design Solutions Around The Globe SGS Tool Company is a privately-held, ISO-certified leader of round solid carbide cutting tool technology for the aerospace, metalworking, and automotive industries with manufacturing sites in the United States and United Kingdom. Our global network of Sales Representatives, Industrial Distributors, and Agents blanket the world selling into more than 60 countries. Leaders in Solid Carbide Tool Technology Brand names such as Z-Carb, S-Carb, V-Carb, Hi-PerCarb, Multi-Carb have become synonymous with high performance tooling...