multi-carb
1 / 12Seiten

Solid Carbide Tools multi @arb HIGH PERFORMANCE FINISHING END MILLS Multi-Flute End Mills High Performance Tooling

TEST INFORMATION SGS Helps Aerospace Company gain over 27 days of production while reducing the cost per part by nearly 78%! SGS Multi-Carb Tool Diameter Cycle Time Metal Removal Rates The SGS Multi-Carb was able to produce the cut at twice the axial depth of the competition at 204% greater feed rates. This equates into 4 times more metal removal at 25% of the original cycle time. SGS was able to accomplish a tool life of 25 parts where the competitor was only able to obtain 4 parts. This was a tool life improvement of 625%. The end user was able to gain 653.4 hours of production for a...

FEATURES & BENEFITS The Multi-Carb High Performance Finishing End Mill incorporates a large number of flutes for stability and high feed finishing capabilities in applications where surface finish and tolerance are critical factors. The large flute count design allows smoother cutting performance and increased tool life, positively impacting productivity and quality levels. • Available with 7, 9 or 11 Flutes based on tool diameter • Designed with a 35° Helix Angle • High Flute Count increases feed rates and improves stability • Odd Number of Flutes control natural harmonics while...

CORNER RADiUS TOLERANCES (inch) R = +0.000 / -0.002

CORNER RADiUS TOLERANCES (mm) R = +0,000 / -0,050

Hardness BRINELL Diameter (inch) CAST IRON (LOW / MEDIUM ALLOY) Gray, Mallable, Ductile CAST IRON (DIFFICULT / HIGH ALLOY) Gray, Mallable, Ductile

Hardness BRINELL Diameter (inch) STAINLESS STEEL <325 <PH> < 325 13-8 PH, 15-5PH, 17-4 PH, < 300 SUPER ALLOYS (NICKEL, COBALT, IRON BASED) Inconel 601, 617, 625, Incoly 800, Monel 400 SUPER ALLOYS (NICKEL, COBALT, IRON BASED -DIFFICULT) Inconel 718, 750X, Incoly 925, Waspaloy, Hastelloy, Rene < 350 TITANIUM ALLOYS Pure Titanium, Ti6Al4V, Ti6Al2Sn4Zr2Mo, Ti4Al4Mo2Sn0.5Si ‘Maximum recommended depth shown ‘Reduce speed and feed recommendations for materials harder than listed ‘Above recommendations are based on ideal conditions. Adjust parameters accordingly for smaller taper machining...

Multi-Carb  |  Speed & Feed Recommendations Hardness BRINELL CAST IRON (LOW / MEDIUM ALLOY) Gray, Mallable, Ductile CAST IRON (DIFFICULT / HIGH ALLOY) Gray, Mallable, Ductile Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min)

Multi-Carb  |  Speed & Feed Recommendations Hardness BRINELL STAINLESS STEEL (PH) 13-8 PH, 15-5PH, 17-4 PH, Custom 450 SUPER ALLOYS (NICKEL, COBALT, IRON BASED) Inconel 601, 617, 625, Incoly 800, Monel 400 SUPER ALLOYS (NICKEL, COBALT, IRON BASED – DIFFICULT) Inconel 718, 750X, Incoly 925, Waspaloy, Hastelloy, Rene TITANIUM ALLOYS Pure Titanium, Ti6Al4V, Ti6Al2Sn4Zr2Mo, Ti4Al4Mo2Sn0.5Si Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) Feed (mm/min) *Maximum recommended depth shown...

Solid Carbide Tools Performance by Design Solutions Around The Globe SGS Tool Company is a privately-held, ISO-certified leader of round solid carbide cutting tool technology for the aerospace, metalworking, and automotive industries with manufacturing sites in the United States and United Kingdom. Our global network of Sales Representatives, Industrial Distributors, and Agents blanket the world selling into more than 60 countries. Leaders in Solid Carbide Tool Technology Brand names such as Z-Carb, S-Carb, V-Carb, Hi-PerCarb, Multi-Carb have become synonymous with high performance tooling...