FiberPatrol FP1100X
1 / 4Seiten

FiberPatrol® FP1100XFor Fence-Mounted Intrusion Detection FEATURES AND BENEFITS • Detect and locate perimeter intrusions over a distance of up to 50 km (31 mi) • Pinpoint intrusions with a ±4 m (13 ft) accuracy • Accurate ranging of multiple simultaneous intrusions • Sensor cable continues to operate up to the point of a cut • Dual sensor channels • 100% operational after a cable cut in cut-immune configuration; maximum perimeter 25 km (15.5 mi) • High Probability of detection (Pd) and low Nuisance Alarm Rate (NAR) • Software-configurable detection zones • No outdoor power or communication infrastructure required • EMI and lightning immune • No electronics or grounding points required in the field • Accurate locating for directing CCTV and/or response forces • Field components intrinsically safe • Alarms reported by zone number, cable distance and/or GPS coordinates • Multiple options for integration with SMS, VMS and PSIM platforms • Easy to install and maintain • Economy-of-scale value The FiberPatrol FP1100X for fence-mounted intrusion detection provides up to 50 km (31 mi) of protection in perimeter applications. Its fiber optic sensor technology requires no powered or conductive items in the field, making the sensor completely immune to EMI and lightning and intrinsically safe in the presence of explosive atmospheres. The FP1100X accurately locates intrusions even when there are multiple simultaneous intrusions or in the presence of non-localized environmental noise that would overwhelm the location capability of other long-range fiber optic sensors. The FP1100X's resilient design allows detection to continue right up to the point of a cut in the sensor cable. Detection and ranging of simultaneous intrusions The FP1100X is designed specifically to detect multiple simultaneous events. The full length of the cable is continuously analyzed and disturbances at different locations are reported independently. Cut immunity When the sensor cable is cut, either accidentally or in an attempt to defeat the sensor, the FP1100X immediately reports the incident, including its exact location. Moreover, the sensor retains the ability to detect and localize intrusions up to the point of the cut. When installed in the cut-immune configuration, the sensor continues to provide detection on the full perimeter even after a cable cut. The maximum perimeter length in the cut-immune configuration is 25 km (15.5 mi). Detection settings The advanced detection algorithm incorporates thresholds, spatial parameters and timing parameters. Detection settings include alarm threshold, disturbance threshold, event life persistence and duration threshold.

FiberPatrol FP1100X For Fence-Mounted Intrusion Detection Sensor cables System capabilities The FP1100X uses single-mode fiber within telecommunications-grade cable. The sensing function requires one fiber – additional fibers within the cable can be used for other communications purposes like Ethernet and/or Senstar’s proprietary Silver Network protocol (for communication with other Senstar sensors like Senstar LM100 intelligent perimeter lighting and sensing solution, OmniTrax® buried cable sensor, UltraWave™ microwave, or XField® electrostatic sensors). The FP1100X provides sensing on up...

FiberPatrol FP1100X For Fence-Mounted Intrusion Detection Independent sensor configuration Technical specifications SENSOR UNIT Main features • Provides intrusion detection for long perimeters from a central location • Localization of intrusions and software assignable detection zones • Redundant bi-directional dual receiver operation provides industry-leading resilience to cut or damaged cable • Central adjustment of all sensor parameters over long distances • Simple integration with SMS/VMS systems SPECIFICATIONS Sensor length • Two sensor channels, each providing sensing on up to 25 km...

FiberPatrol FP1100X For Fence-Mounted Intrusion Detection info@senstar.com • senstar.com Copyright © 2017. All rights reserved. Features and specifications are subject to change without notice. The Senstar name and logo, OmniTrax, FlexZone, and XField are registered trademarks of Senstar Corporation. FiberPatrol, UltraLink, UltraWave and Senstar LM100 are trademarks of Senstar Corporation. Product manufactured in ISO 9001:2008 certified facility. Version: DS-FP-001-IN-R8-E-12/17