Kataloge >
ITT >
Ridge Seal Valve

Ridge Seal Valve
1 / 2Seiten

Katalogauszüge

Ridge Seal Valve Aerospace Controls Key Features • No-resistance flow, same as ball valve performance • Reduced mass over standard ball valve • Reduced friction/torque during opening/closing of valve • Spring-energized seal for improved seal life • Compatible with any rotary actuator • Patent Pending Product Overview The ITT Aerospace Controls 2” (50.8 mm) Ridge Seal Valve is an electric motor actuated, normally closed segmented ball valve. The Ridge seal configuration eliminates typical ball valve seal contact and wear. The majority of the seal is not in contact with the segmented ball during transition from “Close” to “Open” or vice versa, except in fully closed position. Point contact rather than line contact during the transition results in lower friction/torque in transition. This design maximizes seal life, minimizes operating torque, and reduces leakage over valve operating life. Ridge Seal Valve supports both fuel and nitrogen-enriched air flow systems. ITT Aerospace Controls | 28150 Industry Drive | Valencia, CA 91355, USA Phone: 661-295-4000 | Fax: 661-294-1750 Email: sales.aerospace@itt.com | Web: w

Katalog auf Seite 1 öffnen

Pressure Operating Proof Burst Negative Temperature Ambient Fluid Operating Torque Internal Leakage Jet Fuel Nitrogen (GN2) External Leakage Jet Fuel / Nitrogen (GN2) Pressure Drop Weight Operating Life 60 psig (4.14 bar) 240 psig (16.55 bar) 360 psig (24.82 bar) 60 psig (4.14 bar) -65°F to +158°F (-54°Cto +70°C) -65°F to +150°F (-54°Cto +65.6°C) Pressurized @ 60 psig and -65° F (@ 4.14 bar and -54°C) Open and Close 20 in-lb. (2.26 Nm) < 0.1 sccm from -12.2 psig to +60 psig (-0.84 bar to 4.14 bar) < 1.0 sccm from -12.2 psig to +60 psig (-0.84 bar to 4.14 bar) Zero from 0 psig to 360 psig (0...

Katalog auf Seite 2 öffnen

Ridge Seal Valve 1 / 2Seiten

Katalogauszüge

Alle Kataloge und technischen Broschüren von ITT

Ridge Seal Valve
1 / 2Seiten