Kataloge >
Howell Instruments >
H394 Tempcal Tester

H394 Tempcal Tester
1 / 2Seiten

Katalogauszüge

PORTABLE ENGiNE TEST SETS & TRIMMERS Multi-Range Thermocouple and Thermal Switch Tester H394R NSN 4920-01-468-9406 H394-115 NSN 4920-01-464-9810 Precision Testing for • Thermal Switches • Chromel®-Alumel®2 Thermocouples • Continuous-Wire Fire Detection Systems Howell's TEMPCAL® Tester provides a portable, lightweight means for conducting repeatable, accurate testing of thermal switches, thermocouples and continuous-wire fire detection systems. Connected to the H394, TEMPCAL® Heater Probes can test heat sensitive detectors either in their normal operating location or on the bench. Testing thermal sensors in place dramatically reduces test time and associated cost. Providing rapid heat rise and stabilization, this system enables an 800 °F thermal switch to be heated to test temperature in approximately five minutes. The five minute period is sufficient to heat the thermal switch and verify its operation. Once the probe is heated, additional switches can be checked rapidly. 1 TEMPCAL® is a registered trademark of Howell Instruments, Inc. 2 Chromel® and Alumel® are registered trademarks of Hoskins Manufacturing Company .^8945 South Freeway Fort Worth, Texas 76140 www.howellinst.com 817-336-7411 Fax: 817-336-7874 info@howellinst.com

Katalog auf Seite 1 öffnen

Portable engine test sets & trimmers Check Check Cable Cable Adapter Adapter BH450 BH450 Check Cable Cable Cable Cable Check Check Check Adapter Adapter BH450 BH450 BH361 BH361 Check Junction Check Cable Cable Junction Box Box BH361 BH361 Junction Junction BH405 BH405 Box Box Heater Heater Cable Cable BH405 BH405 Heater Heater Cable Cable LINE FUSE 25A TEST TEMPERATURE JETCAL /TEMPCAL PROBE(S) INPUT SELECT LINE FUSE 25A TEST TEMPERATURE THERMOCOUPLE INPUT THERMOCOUPLE INPUT Harnesses containing up to 12 thermocouples can be tested by using the BH361 Series junction box. The H394 monitors...

Katalog auf Seite 2 öffnen