
Gruppe: EVIDENT

Katalogauszüge

The MagnaFORM™ scanner is a fast and easy way to inspect 304 and 316 stainless steel to detect stress corrosion cracking (SCC) or cracks in a weld, even if the parts are painted or rough. Some conventional inspection methods, such as penetrant testing, require inspectors to remove paint from the component, thoroughly clean it, wait for the part to dry, begin the test, and wait for the test to develop. The MagnaFORM eddy current array (ECA) solution provides reliable, real-time images quickly on painted, uncleaned parts, saving you the time and cost associated with tedious inspection preparation. Even if the paint thickness is not uniform, the solution’s high signal-to-noise ratio maximizes the probability of detection. For inspecting rough welds and corroded areas, the solution’s dynamic lift-off compensation helps ensure the probe remains sensitive to surface-breaking defects. Faster Inspections Help Reduce Your Costs • Effective at detecting stress corrosion cracking • High probability of detection • Intuitive imaging and archiving No more stripping and repainting • Reliable data through uneven paint • Significant time savings • Easy to use thanks to the predefined setup
Katalog auf Seite 1 öffnen
Features that Help You to inspect Stainless Steel Lift-off compensation: Even if the thickness of paint changes, the results remain the same Very low noise: Intuitive real time image, no more noise C-scan image of 304 stainless steel with 0 mm of lift-off C-scan image of 304 stainless steel with 3 mm of lift-off The screen shots shown upper, is showing how the detectability is stable even if the lift off vary between 0 mm to 3mm, that means if the thickness of paint is not even or if the probe have not good contact with the part, the detection is always reliable. High probability of...
Katalog auf Seite 2 öffnenAlle Kataloge und technischen Broschüren von Evident - Olympus Scientific Solutions
-
IPLEX GX/GT
8 Seiten
-
Mehr Lösungen, mehr Flexibilität
20 Seiten
-
27MG Ultraschalldickenmesser
3 Seiten
-
DELTA Professional
2 Seiten
-
Vanta Overview
2 Seiten
-
IPLEX TX Industrial Videoscopes
4 Seiten
-
OmniScan X4
8 Seiten
-
39DL PLUS
12 Seiten
-
Industrial Light Source Range
4 Seiten
-
35 RDC
2 Seiten
-
Scanners and Accessories
36 Seiten
-
Remote Visual Inspections
16 Seiten
-
OLYMPUS LC30
2 Seiten
-
TRIPLE KIT Generation 2
2 Seiten
-
CIX100
16 Seiten
-
OLYMPUS CIX Series
24 Seiten
-
MX63/MX63L
20 Seiten
-
SWTLU-C
4 Seiten
-
GX53
20 Seiten
-
OLS5000
42 Seiten
-
BTX II, TERRA
2 Seiten
-
EX Series Instruments
4 Seiten
-
Vanta Overview
3 Seiten
-
Clear Images, Precise Analysis
8 Seiten
-
Portable XRD
2 Seiten
-
TOFD Solution
4 Seiten
-
BondMaster 600
5 Seiten
-
Triple Kit Generation 2
2 Seiten
-
45MG
12 Seiten