
Katalogauszüge

Core Alloys Cladding Alloys Sides Clad Cladding Thinckness Temper 3003, 3005 4004, 4045, 4343 One or Both Sides (upon request) 5%, 10%, 15% (upon request) O (fully annealed) H24 (strain-hardened and partially annealed - 1/2 hard)
Katalog auf Seite 1 öffnen
Alclad and Brazing Sheets and Strips Component Alloys Cladding alloys Thickness Width Length for sheets Coil dimensions 0,5 - 3 880 - 1250 1000 - 4000 Inside Diameter, ID 508 ± 12,7 Outside Diameter, OD max. 1500 Eye to sky / Eye to wall deliveries Technical conditions Chemical compositions, tempers, mechanical properties, dimensional tolerances, surface conditions etc. are according to the relevant standards (the latest editions): EN 573-3, EN 515, EN 485-1, EN 485-2, EN 485-4 or ASTM B 209 or according to technical specification agreed with customer.
Katalog auf Seite 2 öffnenAlle Kataloge und technischen Broschüren von ALRO
-
Primary Aluminium Ingots
2 Seiten
-
Standard Flat Rolled Products
4 Seiten
-
Tread Plates
2 Seiten
-
Primary Aluminium Wire Rod
2 Seiten
-
Plates
2 Seiten
-
Embossed Sheets and Coils
2 Seiten
-
Aluminium Extruded Profiles
2 Seiten