DMS-EGP02
4Pages

{{requestButtons}}

Catalog excerpts

DMS-EGP02 - 1

Dynamic Measurement System with Dual Antenna GPSDMS-EGP02 Description: Originally developed to meet the needs of automotive testing professionals, the Dynamic Measurement System (DMS) was designed for monitoring the drive and handling characteristics of vehicles. The DMS may be used in almost any application where triaxial angular rate and triaxial acceleration data is required. These are available in analog and digital output formats. The DMS features six accelerometer outputs. The X, Y, and Z axis outputs represent the accelerations in the plane of the vehicle body, while the second set of three outputs measure the acceleration aligned with an earth-level coordinate system. This allows forward and lateral acceleration measurements that are essentially free of gravity influences. The triaxial sensor set allows software alignment of sensors, greatly reducing any alignment errors. The serial interface is highly configurable and provides access to almost all operational parameters. The DMS-EGP02 is designed for vehicle applications where accurate heading is required, but a magnetic compass is infeasible. This sensor is equipped with a dual GPS antenna system that provides heading data even when the vehicle is not in motion. The addition of the GPS antennas also gives vehicle velocity data to the DMS that enhances the unit's performance during highly dynamic maneuvers such as sharp turns. This makes the DMS-EGP02 inertial gyro sensor a more complete system since it does not require velocity information to be supplied from an external sensor. • Solid State, Strap Down System • Six Accelerometer Outputs • GPS Heading Reference • Rugged, High Reliability • Vibration Resistant • Analog and RS-232 Serial Outputs • Two Year Limited Warranty • Engineering Support Applications: The DMS-EGP02 is useful in automotive testing, vehicle dynamics, and marine applications. This sensor can be used as a replacement for the Watson IMU-E604, and is most useful in applications where magnetic fields make heading data from a fluxgate magnetometer unreliable. Watson Industries, Inc. 3035 Melby Street Eau Claire, Wisconsin 54703 U.S.A Phone: +1 (715) 839-0628 Fax: +1 (715) 839-8248 e-mail: support@watson-gyro.com Website: www.watson-gyro.com

Open the catalog to page 1
DMS-EGP02 - 2

Attitude Range: Bank Range: Elevation Resolution: Analog Scale Factor: Accuracy: Static * Accuracy: Dynamic GPS Heading Range: Resolution: Analog Scale Factor: Accuracy: Static 0.5° Based on antenna spacing. See * Accuracy: Dynamic or Relative Angular Rate Range: Roll, Pitch, Yaw Resolution: Analog Scale Factor: Scale Factor Accuracy: Bias: Roll, Pitch, Yaw Non-Linearity: Bandwidth: Noise: Acceleration Range: X, Y, Z Range: Forward, Lateral, Vertical Resolution: Analog Scale Factor: Scale Factor Accuracy: Bias: X, Y, Z Non-Linearity: Bandwidth: GPS Positioning Range: Latitude Range:...

Open the catalog to page 2
DMS-EGP02 - 3

Acquisition time for GPS units is typical for the contiguous United States. Acquisition time may differ due to interference in your geographic area. Specifications are subject to change without notice. This product may be subject to export restrictions. Please consult the factory. Watson Industries, Inc. 3035 Melby Street Eau Claire, Wisconsin 54703 U.S.A Phone: +1 (715) 839-0628 Fax: +1 (715) 839-8248 e-mail: support@watson-gyro.com Website: www.watson-gyro.

Open the catalog to page 3
DMS-EGP02 - 4

FORWARD WATSON INDUSTRIES, INC. MADE IN U.S.A CAUTION DELICATE INSTRUMENT HANDLE WITH CARE Watson Industries, Inc. 3035 Melby Street Eau Claire, Wisconsin 54703 U.S.A Phone: +1 (715) 839-0628 Fax: +1 (715) 839-8248 e-mail: support@watson-gyro.com Website: www.watson-gyro.com

Open the catalog to page 4

All Watson Industries catalogs and technical brochures

  1. DMS-SGP01

    3 Pages

  2. DMS-S605

    3 Pages

  3. DMS-EGP01

    3 Pages

  4. DMS-E604

    3 Pages