• Products
  • Catalogues
  • News & Trends
  • Exhibitions

DMS-EGP01 - 3 Pages

Add to MyAeroExpo favorites
DMS-EGP01
  1. P. 1

  2. P. 2

  3. P. 3

Catalogue excerpts

Dynamic Measurement System with Single Antenna GPSDMS-EGP01 Description: Originally developed to meet the needs of automotive testing professionals, the Dynamic Measurement System (DMS) was designed for monitoring the drive and handling characteristics of vehicles. The DMS may be used in almost any application where triaxial angular rate and acceleration data is required. The sensor provides both angular rate and acceleration outputs in analog and digital formats. The DMS features six accelerometer outputs. The X, Y, and Z axis outputs represent the accelerations in the plane of the vehicle body, while the second set of three outputs measure the acceleration aligned with an earth-level coordinate system. This allows forward and lateral acceleration measurements that are essentially free of gravity influences. The triaxial sensor set allows software alignment of sensors, greatly reducing any alignment errors. The serial interface is highly configurable and provides access to almost all operational parameters. The DMS-EGP01 is used primarily in vehicle applications to integrate the features of a DMS-E604 and a velocity sensor into one unit. This sensor is equipped with a single GPS antenna that provides vehicle velocity data to the DMS. This data enhances the unit's performance during highly dynamic maneuvers such as sharp turns and also makes this inertial gyro sensor a more complete system since it does not require velocity information to be supplied from an external sensor. Applications: The DMS-EGP01 is typically used in automotive testing and vehicle dynamics applications. This sensor operates as an enhanced DMS-E604. The GPS antenna provides the DMS with a velocity signal, and also transmits heading data while in motion. • Solid State, Strap Down System • Six Accelerometer Outputs • GPS Velocity Data • Low Cost • Rugged, High Reliability • Vibration Resistant • Analog and RS-232 Serial Outputs • Two Year Limited Warranty • Engineering Support Watson Industries, Inc. 3035 Melby Street Eau Claire, Wisconsin 54703 U.S.A Phone: +1 (715) 839-0628    Fax: +1 (715) 839-8248 e-mail: support@watson-gyro.com Website: www.watson-gyro.com

 Open the catalogue to page 1

Attitude Range: Bank Range: Elevation Resolution: Analog Scale Factor: Accuracy: Static * Accuracy: Dynamic GPS Heading Range: Resolution: Analog Scale Factor: Accuracy: Static * Accuracy: Dynamic or Relative Angular Rate Range: Roll, Pitch, Yaw Resolution: Analog Scale Factor: Scale Factor Accuracy: Bias: Roll, Pitch, Yaw Non-Linearity: Bandwidth: Noise: Acceleration Range: X, Y, Z Range: Forward, Lateral, Vertical Resolution: Analog Scale Factor: Scale Factor Accuracy: Bias: X, Y, Z Non-Linearity: Bandwidth: GPS Positioning Range: Latitude Range: Longitude Range: Altitude Resolution: Latitude,...

 Open the catalogue to page 2

FORWARD WATSON INDUSTRIES, INC. MADE IN U.S.A CAUTION DELICATE INSTRUMENT HANDLE WITH CARE Watson Industries, Inc. 3035 Melby Street Eau Claire, Wisconsin 54703 U.S.A Phone: +1 (715) 839-0628 Fax: +1 (715) 839-8248 e-mail: support@watson-gyro.com Website: www.watson-gyro.com

 Open the catalogue to page 3

All Watson Industries, Inc. catalogues and technical brochures

  1. DMS-SGP01

    3 Pages

    En
  2. DMS-S605

    3 Pages

    En
  3. DMS-EGP02

    4 Pages

    En
  4. DMS-E604

    3 Pages

    En