• Products
  • Catalogues
  • News & Trends
  • Exhibitions

TELESCOPING GRAVITY LOADER - 2 Pages

Add to MyAeroExpo favorites
TELESCOPING GRAVITY LOADER
  1. P. 1

  2. P. 2

Catalogue excerpts

TELESCOPING GRAVITY LOADER The Telescoping Gravity Loader is designed to assist in the loading of cargo in 48’ and 53’ trailers without built-in roller conveyors. It is mounted on a base that allows the unit to span the gap at the dock door to allow the gravity conveyor to be rolled manually into the trailer. The unit telescopes manually to allow for loading and collapses manually as the trailer gets loaded. Under normal use, the Telescoping Gravity Loader is hooked to a chute connecting it to the system. The pictures above show a gravity conveyor under a load chute without a base. The unit can be made longer or shorter upon request. “FIRST CLASS DOESN’T HAVE TO COST MORE” WASP, Inc. Box 249 Glenwood, MN 56334 (320) 634-5126 FAX (320) 634-5891 www.wasp

 Open the catalogue to page 1

SPECIFICATIONS: FRAME: Five Section Aluminum Side Rails with Steel Legs for the Wheels. ROLLERS: PVC Rollers with Steel Rollers in High Impact Areas; 24.00 Inches Wide, 3.00 Inches on Center, 1.90 Inch Diameter. CAPACITY: 50 Pounds per Linear Foot. DIMENSIONS:    RETRACTED    EXTENDED    OVERALL HEIGHT

 Open the catalogue to page 2

All WASP, INC. catalogues and technical brochures

  1. UNL-1063

    2 Pages

    En
  2. CARGO DOLLIES

    1 Pages

    En
  3. WASP-Stairs

    3 Pages

    En