Baggage Handling Conveyors
6Pages

{{requestButtons}}

Catalog excerpts

Baggage Handling Conveyors - 1

Baggage Handling Conveyors Geo. Robson & Co. Airport Baggage Mechanical Handling Solutions offer the ultimate for speed, reliability, robustness and product life. With a range of conveying solutions to suit the most challenging of sites and surroundings. Robsons offer conveyors configured for Weighing, Sorting, Security, X-Ray, Out of Gauge, Diverting Horizontally and Vertically. With Merging capabilities, Incline and Decline plus Power Bends, Robsons take the lead for the total solution package. The conveyors casings are constructed from 3 pressing slider bed using 2.5mm thick mild steel plate. All drive frames, joint flanges and equipment fixings are fabricated from rolled mild steel flat and pressed sections. Conveyor troughs are jig built to ensure conveyor sections are square and interchangeable. The conveyor tension gear is guarded with painted mild steel punched plate guards. All nip points are fitted with painted punched mild steel plate guards. Punched mild steel plate to the underside of conveyors (where required) will be hinged on one side and fitted with budget locking devices where applicable. Terminal pulleys are calculated at 124mm diameter and are short faced complete with static shrouds. All conveyors are driven by shaft mounted geared motor unit complete with torque arm fixing. All bearings are grease lubricated, self-aligning, single row, ‘Y’ - type, anti-friction and sealed. Bearing selection is based on 50,000 hours under the duty load operating condition, factored to give a 20 kilogram per metre real life conveyor loading. Belt tension adjustment is provided via a screw tension gear. Conveyor belts will be of 2 ply polyester monofilament fibre with the lower ply of spun fabric to produce low noise characteristic. Horizontal conveyors are fitted with smooth top and inclined/declined conveyors are fitted with grip face conveyor belting. The conveyor belting is flame retardant in accordance with ISO 340. All conveyors are supplied with conveyor belts suitable for factory or site vulcanising. Geo. Robson & Co. (Conveyors) Ltd Coleford Road, Sheffield, S9 5PA Tel. +44 (0)114 2444221 Fax. +44 (0)114 2433066 Info@robso

Open the catalog to page 1
Baggage Handling Conveyors - 2

Baggage Handling Conveyors Series 3 Standard Delivery Conveyor. STANDARD DELIVERY CONVEYOR Dimensions Material Finish Speed Reverse 5000mm > 16000mm Mild Steel - Stainless Steel Mild Steel: Galvanised / Powder Coated to customer specified Ral. Stainless Steel: Natural 0.5m/S > 1.2m/S Yes Geo. Robson & Co. (Conveyors) Ltd Coleford Road, Sheffield, S9 5PA Tel. +44 (0)114 2444221 Fax. +44 (0)114 2433066 Info@robson.co.uk www.robson.co.uk

Open the catalog to page 2
Baggage Handling Conveyors - 3

Baggage Handling Conveyors Series 3 Injection Conveyor. Left Hand side Right Hand side INJECTION CONVEYOR Dimensions Material Finish Speed Reverse 1200mm > 2500mm Mild Steel - Stainless Steel Mild Steel: Galvanised / Powder Coated to customer specified Ral. Stainless Steel: Natural 0.5m/S > 1.6m/S - Geo. Robson & Co. (Conveyors) Ltd Coleford Road, Sheffield, S9 5PA Tel. +44 (0)114 2444221 Fax. +44 (0)114 2433066 Info@robson.co.uk www.robson.co.uk

Open the catalog to page 3
Baggage Handling Conveyors - 4

Baggage Handling Conveyors Series 3 Queue Conveyor. Left Hand side Right Hand side QUEUE CONVEYOR Dimensions Material Finish Speed Reverse 1200mm > 1500mm Mild Steel - Stainless Steel Mild Steel: Galvanised / Powder Coated to customer specified Ral. Stainless Steel: Natural 0.5m/S > 1.6m/S No Geo. Robson & Co. (Conveyors) Ltd Coleford Road, Sheffield, S9 5PA Tel. +44 (0)114 2444221 Fax. +44 (0)114 2433066 Info@robson.co.uk www.robson.co.uk

Open the catalog to page 4
Baggage Handling Conveyors - 5

Baggage Handling Conveyors Series 3 Extended Queue Conveyor. Left Hand side Right Hand side EXTENDED QUEUE CONVEYOR Dimensions Material Finish Speed Reverse Mild Steel - Stainless Steel Mild Steel: Galvanised / Powder Coated to customer specified Ral. Stainless Steel: Natural 0.5m/S > 1.6m/S No Geo. Robson & Co. (Conveyors) Ltd Coleford Road, Sheffield, S9 5PA Tel. +44 (0)114 2444221 Fax. +44 (0)114 2433066 Info@robson.co.uk www.robson.co.uk

Open the catalog to page 5
Baggage Handling Conveyors - 6

General Arrangement The Series 3. Geo. Robson conveyor is a standard Robson product range, which has the general configuration as shown above. Fig 1 Fig 2 Fig 3 Fig 4 Series 3 Standard Delivery Conveyor Series 3 Injection Conveyor Series 3 Queue Conveyor Series 3 Extended Queue Conveyor The conveyor is constructed on a frame with a side casing on either side of the conveyor belt skid plate. The conveyor belt is supported on this skid plate by a typical pulley and roller arrangement. This pulley arrangement consists of a drive pulley, at the head of the conveyor, and a return pulley at the...

Open the catalog to page 6

All Robson Handling Technology Ltd catalogs and technical brochures

  1. Airglide

    2 Pages

  2. Lump Breaker

    2 Pages

  3. Pusher

    2 Pages

  4. VERTI-DIVERT

    2 Pages

  5. Ancillaries

    2 Pages

Archived catalogs

  1. plough

    2 Pages

  2. Carousel

    2 Pages