ECO-NT
2Pages

ECO-NT Technical features ECO-NT CNC-technology at its best ECO-NT1K (with fork-head working unit and high-speed spindle 4.6 kW) A centre partition has been provided to allow for entirely independent machining (reciprocal operation) on both sides of the table. A pneumatic system permits this centre partition to be moved in the X-direction by 500 mm. Thus, the working area will be extended by 250 mm in the X-direction. The clear inserting width in the opposite station will in turn be reduced by 250 mm. The centre partition only moves when a change of the working station takes place. Working units One or two fork-shaped or cardanic 5-axes working heads for the efficient 6-sided complete machining of form parts and profiles. High-frequency spindle with 4.6 kW, 3,200 - 60,000 rpm or spindle with 15 kW, 0 - 24,000 rpm Tool changer Tool changer plate with 8, 12 or 24 places that moves along. Machine table Machine table with steel bars (threaded and fitted bushings) in tubular frame design. Examples for working areas with various equipment: ECO-NT 1K (X, Y, Z): 3,600 x 1,000 x 700 mm Axes movements X, stroke (left side table, head 1) X2 stroke (right side table, head 1) minimum distance )<-H stroke of centre partition ECO-NT2K (with fork-head working units and high-speed spindles 4.6 kW) It is an identical feature of both, the ECO-NT 1K and the ECO-NT 2K, that their working areas are separated by a movable centre partition. Thus, the optimum utilisation of the working table will also be assured. ECO-NT1K X-axis = 4,140 mm (80 m/min) Y-axis = 1,440 mm (80 m/min) Z-axis = 1,000 mm (40 m/min) B-axis = ± 135° (180°/s) C-axis = ± 360° (180°/s) ECO-NT 2K X-axis = 4,740 mm (80 m/min) Y-axis = 1,440 mm (80 m/min) Z-axis = 1,000 mm (40 m/min) B-axis = ± 135° (180°/s) C-axis = ± 360° (180°/s) Feed drives Maintenance-free, highly dynamic three-phase servo motors with modern digital drive technology and integrated absolute value transmitter (measuring system). Direct measuring system in the Z-axis. Chip removal Machine substructure with integrated chip chutes and sliding belt conveyor, conveying direction to the left. Installation dimensions Control system Sinumerik 840D Solution Line HT2-hand control device for manual operation (option) Movable control panel with • PC-keyboard • 17“ TFT-monitor • Machine control panel Note: The working areas may vary depending on the technical equipment (examples of configuration). standard with sound insulating cabin standard with sound insulating cabin Reichenbacher Hamuel GmbH Rosenauer StraBe 32 ■ D-96487 Dorfles-Esbach Phone: +49 (0)9561-599-0 ■ Fax: +49 (0)9561-599-199 info@reichenbacher.de ■ www.reichenbacher.com A member of the SCHERDEL group

Universal application – for example for special profiles in the aeroplane, car or stair production, efficient allround-machining of formed parts and plates, machining of combined hybrid parts made of plastics and metal, machining of aluminium and plastic parts. Extremely handy – 22 m2 of required space amount to 6 m3 of working area Working head Working areas The ECO-NT series of Reichenbacher Hamuel sets new standards in the machining of plastics, aluminium and composites: perfect 5-axes machining and universal applicability are combined with maximum operator convenience and very compact...