• Products
  • Catalogues
  • News & Trends
  • Exhibitions

VEL2164 Coalescer/Separator - 28 Pages

Add to MyAeroExpo favorites
VEL2164 Coalescer/Separator
  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

Catalogue excerpts

Filter/Separator Cartridges for Aviation Fuel Handling aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Parker Velcon ENGINEERING SUCCESS.

 Open the catalogue to page 1

Typical Distribution System for Clean Dry Aviation Fuel - Filter/Separator EI 1581 Specification, 5th Edition Terminal Storage Optional dehydrator, prefilter, and clay treater vessels are not required but are recommended to ensure delivery of clean dry fuel and to extend the life of the coalescer and separator cartridges in the filter/separator vessels. Tank Truck Dehydrator VCA® (Compliant with EI 1598) Clay Treater

 Open the catalogue to page 2

Similarity Certification Form ... 21 Airport Storage Three types of filter/separator vessels for various locations in an aviation fueling system: Three categories are based on specific fuel types: Category C: For commercial aviation turbine fuels Category M: For military aviation turbine fuels and JP-8 Type S: Capable of handling significant amounts of water and dirt in the fuel Type S-LD: Capable of handling significant water and low dirt content Category M100: For thermal stability enhanced JP-8 military aviation turbine fuels Type S-LW: Capable of handling significant dirt and low water content General...

 Open the catalogue to page 3

Coalescer Cartridges for Aviation I Series Coalescer • Cost effective particle and emulsified water removal from hydrocarbon fluids Coalescer cartridges are employed as the first stage in filter/separator vessels for hydrocarbon fluids. They perform two functions: (1) coalesce (combine) highly dispersed, emulsified water particles into larger water drops and (2) filter-out particulate contaminants. • Easy installation and replacement with one-piece design • Choice of Threaded Base or Open End cartridges • Choice of All-Fiberglass Media or Combination Fiberglass and Pleated Media • Field proven...

 Open the catalogue to page 4

is accomplished by employing a tighter, finer filtration media. Flow direction is from inside to outside of the cartridge. This minimizes surface velocity and helps prevent the water drops from breaking up and being carried downstream. APPLICATION Coalescer cartridges are used primarily to coalesce emulsified water and remove particles from hydrocarbon fluids. The largest single application is the filtration of aviation jet fuel. They are also used with other types of fuels, process streams in refineries and petrochemical plants, and condensate streams where natural gas is produced. Other liquids...

 Open the catalogue to page 5

DESCRIPTION Model Number System. Refer to the box at right. The one or two digit Series Designator relates to the approximate micron rating of each model coalescer cartridge. Note that this is a nominal rating and should be used for reference only. The "0"' "2” and "4” Series allfiberglass cartridges are rated at 25, 5, and .3 microns respectively. The "2” and "4” Series are commonly used with diesel and other fuel oils, and are a compromise between filtration efficiency (cartridge life) and water removing capability. They coalesce gross water, but normally do not remove fine water haze. The all-fiberglass...

 Open the catalogue to page 6

EI1581 5TH EDITION QUALIFIED COALESCERS The I-6xxC5 (TB), I-6xxMM, I-6xxA4. and I-6xxJF5 (TB) Series coalescers (“xx” denotes nominal cartridge length) incorporate multi-layered pleated media designed to provide superior dirt holding capacity in the field, combined with 0.4 micron efficiency. The I-6xxC5 (TB) replaces both Parker Velcon's I-6xx85 (TB) and I-6xx87 (TB) cartridges. These cartridges are available in either threaded base or open-end configuration. CATEGORY FUELS Parker Velcon has tested and qualified a comprehensive range of products to meet the EI 1581 5th Edition Specification....

 Open the catalogue to page 7

Velcon Model Numbers include significant product information. Example: SO - 6 36 PV Code identifying Media, Tube Type, and End Cap Design - Approx. Length in inches - Approx. Diameter in inches _ Outside-to-lnside Flow Separator Cartridge FEATURES • Optimum 2nd stage water removal • Choice of Teflon® Coated Screen, Synthetic or Pleated Paper Media • Field proven performance • Largest selection of replacement elements DESCRIPTION Separator Cartridges are employed as the second stage in filter/ separator vessels. Their sole function is to repel coalesced water drops produced by the first stage cartridges while...

 Open the catalogue to page 8

CARTRIDGE CODE IDENTIFICATION Uniform Variable Uniform Variable Uniform Uniform Uniform Variable Variable Variable Uniform Uniform Variable Variable Variable *The shelf life for pleated paper separators (for example, SO-xxxPLF3 and SO-6xxPLBZ) is one year SPECIFICATIONS Flow Control (perforation) • TCS medium is 200 mesh stainless steel screen coated on both sides with green Teflon® • The screen is lockseam folded and fastened with an internal aluminum clip • Pleated medium is silicone treated resin impregnated paper with a protective outer aluminum screen jacket • Aluminum Tube • Aluminum and/or...

 Open the catalogue to page 9

DESCRIPTION The SI-xxxx Series separator canister is composed of an inner Teflon®-coated 200 mesh screen. The open endcap on the five inch canister has a locking bayonet mount with wavy spring. The blind end has a nozzle to fit a DOD coalescer o-ring endcap. These separators are qualified to Category M and M100 of the EI 1581 5th Edition Specification. APPLICATION The SI-xxxx Series separator canisters are made to fit over first stage coalescers in DOD military vessels such as those originally made to the MIL-F-27629, MIL-F- 27630, and MIL-PRF-52308 specifications. The inner Teflon coating repels...

 Open the catalogue to page 10

Military Coalescer I-4xxA4 & MM Family Qualified to API/EI 1581 5th Edition, Category M, M100, MIL-PRF-52308J, MIL-PRF-32148 DESCRIPTION The I-4xxMM filter/coalescer cartridge has an internal multilayer pleat block with a large surface area for greater dirt holding capacity. A fine fiber micro-glass shell provides optimum water removal characteristics. The advanced composition of our “MM” Series media allows most vessel configurations to meet EI 1581 5th Edition, Category M, performance requirements. Identical in form and fit to the I-4xxMM, the I-4xxA4 filter/ coalescer cartridges allows most...

 Open the catalogue to page 11