Non-certified Standard Pallets
1Pages

{{requestButtons}}

Catalog excerpts

Non-certified Standard Pallets - 1

PRODUCT INFORMATION OF NON-CERTIFIED STANDARD PALLETS Pallet Size Tare weight CERTIFICATIONS: PalNet air cargo pallets are manufactuered but not certified according to NAS 3610, Rev. 10/ ETSO-C90c / TSO C90c. PalNet GmbH Air Cargo Products is an Approved Manufacturing Organisation, LBA DE.21G.0151, and holder of Alternate Procedures to Design Organisation Approval (AP to DOA) No. AP152. DESCRIPTION: The PalNet air cargo pallets are consisting of a high resistant aluminium plate (alloy 7075-T6 or 7021-T6) and four edge rails (alloy 7020-T6) with a continuous seat track according to MS 33601 A. The four edge rails are forming a frame around the plate. The plate and the edge rails are connected by high tensile aluminium forged corners and stainless steel rivets around the perimeter of the edge rail frame. Due to the non-welded construction damaged edge rails are easy to replace. IATA markings on both long sides are standard. ODLN sticker is also standard. OPTIONS: Edge rails and corners can be anodized according to customer`s request. Nets can be permanently attached. Airline logo can be painted in the middle of the sheet. Bar codes can be fixed either in the seat track or on the edge rail. CMM can be ordered through our website www.palnet-acp.com/cmms.html PalNet GmbH Air Cargo Products  ·  Vulkanstraße 10  ·  D-54578 Wiesbaum +49 6593 980 93 -0   ·   +49 6593 980 93 -17   · 

Open the catalog to page 1

All PALNET GMBH AIR CARGO PRODUCTS catalogs and technical brochures