video corpo

OBSTA STI 48 VDC - 2 Pages

Add to MyAeroExpo favorites

Catalog excerpts

The OBSTA STI is devoted to the marking of all kind of obstacles supplied by a standalone DC power source in 24V or 48V. One-piece molded • perfectly waterproof • no grounding issue • all wiring configuration available • no rise from the ground potential (due to lightning for example) • increased reliability Neon light • continous Voltage • power by a backup power source for continuity of the marking (batteries) • protected against transient voltages • integrated self diagnostic of the light (control of a remote signalization or a backup light possible) MAIN CHARACTERISTICS OBSTA part number Power supply Luminous intensity Current consumption Nominal power Lifetime (without any light decrease*) * with power supply stabilized OBSTA080908D- document could be modified without notice • 5 turns • hard glass cover and tube • «aviation» red color • very long life expectancy in all climatic environment • great light efficiency • luminosity substantially higher than what is recommended by ICAO and FAA • l

 Open the catalog to page 1

LOW INTENSITY NEON ADDITIONAL FEATURES LIGHT INTENSITY DIAGRAM STI IP degree Operating temperature Power supply voltage 2 screws type M8 (provided) Thikness to screw into : 1 à 5 mm On stripped wires (2 power wires, 2 alarm wires) SPECIAL PRECAUTIONS For chimney installation, install the light under the top (1.5 to 3m, 5 to 10ft), as per ICAO and FAA recommendations. For installation in intense electromagnetic fields, the use of shielded wire is highly recommended. OTHER FUNCTIONS - Failure remote signalization by relay (see diagram) 2 vis TH M8 Alimentation Protection contre les surtensions...

 Open the catalog to page 2

All OBSTA catalogs and technical brochures

  1. Warning sphere

    1 Pages


    2 Pages


    2 Pages


    2 Pages

  5. navilite 230

    2 Pages

  6. navilite b

    2 Pages

  7. led

    2 Pages

  8. red flash

    2 Pages

  9. histi

    2 Pages