4006 ST
2Pages

{{requestButtons}}

Catalog excerpts

4006 ST - 1

4006 ST Ultra High Pressure Runway Rubber and Paint Removal Variable UHP pump standard. Adjustable pressure for different applications. Cleans into the grooves of a runway for increased friction and drainage. The easy to use operator interface allows for safe and accurate control of the cleaning system. Single pass paint removal leaves surfaces clean and dry within minutes. • mall truck chassis for easy transport between cleaning sites or offsite waste disposal S • leaning heads easily changeable from rubber removal to paint removal C • 4in (0.86m) wide cleaning path for rubber removal, adjustable cleaning path for paint removal 3 from 6in (0.15 m) to 16in (0.41m) • resh water tank provides up to 2 hours of operating time. F • CD operator interface provides fully computerized control and automated operation for the most L efficient runway cleaning operations. • igh pressure pump location provides easy access for maintenance. H • o vacuum means less noise for the operator N • ithin the Cyclone head, up to 24 sapphire-tipped spray nozzles mounted to high speed rotating W arms, blast the surface with ultra-high pressure water • pecially shaped turbine blades, mounted to the arms, create a swirling vortex of air, water, and S loosened rubber or paint at 140 mph — equivalent to a category 4 cyclone storm • s the Cyclone head moves across the surface, the Cyclone vortex provides a secondary cleaning A effect, while simultaneously lifting the waste and water from the surface and depositing it into a small tank mounted on the cleaning head • high-volume macerator pump emulsifies and pumps the recovered waste and water into the 600 A gallon (2,300 L) waste recovery tank. The used water is then separated from the recovered material for easy disposal • he unique technology of the Cyclone system utilizes instant recovery without an expensive and T maintenance heavy external vacuum system, resulting in a lower cost of operation and a fast

Open the catalog to page 1
4006 ST - 2

Faster, Greener, Cleaner fj^a The Cyclone Difference CYCLONE 4006 ST TECHNICAL SPECIFICATIONS Specifications are subject to change without notice. Additional Cyclone heads available upon request. *Rubber removal based on average buildup. Heavy buildup will decrase the productivity. **Paint removal based on single coated paintlines with reflective glass beads. Excessive paint thickness will decrease productivity. STANDARD FEATURES , • Uses a low volume of water to provide effective rubber removal and paint removal with low water • Simple, on-board, gravity based separation of waste from used...

Open the catalog to page 2

All CYCLONE TECHNOLOGY catalogs and technical brochures

  1. BMP-4000RC

    2 Pages

  2. BMG–444SC

    2 Pages

  3. BMG-444

    2 Pages

  4. CY200™

    2 Pages

  5. SK

    2 Pages

  6. CY200UHP

    2 Pages

  7. CY210

    2 Pages